Bosch Appliances DS9400 manual Trademarks, Fixed Items in Firmware Version

Page 2

DS9400 Series Release Notes for Firmware V2.07 Trademarks

Upgrade Information

Trademarks

Gentex™ is a trademark of Gentex Corporation, Fire Protection Group

CleanMe® is a registered trademark of GE Interlogix

1.0 Fixed Items in Firmware Version V2.07

The D9400 Series Fire Alarm Control Panel (FACP)

V2.07 fixes two bugs:

If this firmware is installed in a control panel that has been running version 1.x software, it is necessary to erase the old programming in the control panel and re- select the control panel type when the control panel is first powered up. Be careful to select “1-DS9400”- an incorrect selection cannot be undone.

3.0 Fixed Items in Firmware Version 2.05

When the Drill button was pressed, only the Local Notification Appliance Circuits would activate. This has been corrected, and the DS9484 Remote NAC supply also activates.

In Firmware Version V2.06, a bug was created when silencing a multiple output module (DS9488/B or DS9489/B), causing some outputs not to silence. This worked correctly in other firmware versions, but worked incorrectly when changing the silence priority feature.

2.0 Fixed Items in Firmware Version 2.06

Version 2.06 firmware for the DS9400 Series Fire alarm Control Panels (FACP) incorporates a change to Preassigned Zone 61 and a bug fix for Outputs assigned to Silencable points.

Preassigned Zone 61 – General Water flow (Silencable) has been changed to a Non- Silencable Zone type.

Preassigned Zone 53 – General Fire alarm (Silencable) has been fixed so that a Non- Silencable point will take priority over a Silencable point.

1.This condition may happen when both Silencable and Non-Silencable points are mapped to the same output.

2.Version 2.05 and prior would configure the output to Silencable or Non-Silencable depending on the last event type activated.

Version 2.05 firmware for the DS9400 Series Fire Alarm Control Panels (FACP) incorporates a bug fix for auto-programming and updates the panel to work with the DS9431 with V1.04 ROM or later.

Auto-programming.

1.When selecting a device type of I/O, the first address programs correctly but if any device option is selected other than “no device,” the second address results in an “Address Error 2.” This V2.05 ROM fixes this issue.

2.The Auto-program feature of the DS9400 with V2.04 ROM does not work properly if a DS9431 V1.04 MUX driver or later is installed. The DS9400 with V2.05 ROM is backwards compatible with V1.04 and earlier versions of the DS9431.

4.0 Fixed Items in Firmware Version 2.04

Version 2.04 firmware for the DS9400 Series Fire Alarm Control Panels (FACP) incorporates several new features and improvements:

Gentex™ Sync Protocol. The control panel can now send Gentex protocol to Gentex Notification Appliance Circuit (NAC) devices. Gentex NAC devices can be added directly to the NAC circuits without a sync module.

CleanMe®. The control panel recognizes the Clean-Me signal from Detection System’s F220 Series Smoke Detectors. If the smoke detectors get dirty, a signal is sent on the two-wire loop, and the control panel will annunciates that there is a dirty detector on the loop.

2

Bosch Security Systems 8/06 36925V

Image 2
Contents DS9400 Series Trademarks Fixed Items in Firmware VersionDS9400 Series Version 03A October Fixed Items Since Firmware VersionBosch Security Systems 8/06 New Features since Firmware Version Known Issues with Firmware VersionBosch Security Systems 8/06 Bosch Security Systems 36925V

DS9400 specifications

The Bosch DS9400 is a premier dishwasher designed to meet the contemporary needs of modern households, combining cutting-edge technology with sleek design and unparalleled performance. Known for its efficiency and innovative features, the DS9400 is a valuable addition to any kitchen.

One of the standout features of the Bosch DS9400 is its exceptional quiet operation. With a noise level as low as 42 decibels, it ranks among the quietest dishwashers available. This discreet performance allows you to run the dishwasher at any time without disrupting your household activities or conversations.

The DS9400 is equipped with advanced Sensory Technology, which optimizes every wash cycle based on the load's soil level and type. This intelligent system automatically adjusts the water usage, temperature, and cycle time to ensure a thorough clean while conserving resources. As a result, it not only delivers sparkling dishes but also enhances water and energy efficiency.

Another remarkable feature is the flexible loading system. The Bosch DS9400 boasts an adjustable third rack, allowing for maximum loading flexibility. This innovative design provides ample space for utensils and small items, ensuring all pieces are cleaned effectively. Additionally, the racks are designed with rubberized coatings to hold items securely in place during operation.

The dishwasher includes a variety of wash cycle options, accommodating various cleaning needs. From a speedy 30-minute Wash and Hold cycle to a Heavy cycle for heavily soiled pots and pans, users can easily select the best option for their load. The Sanitize option ensures that harmful bacteria are eliminated, providing peace of mind alongside sparkling clean dishes.

Moreover, Bosch has integrated smart technology into the DS9400, enabling users to control the appliance via a smartphone app. This feature allows for remote monitoring, cycle programming, and notifications of completion, offering convenience for those with busy lifestyles.

In terms of design, the Bosch DS9400 reflects modern aesthetics with a stainless steel finish and a sleek, integrated handle. The interior is also thoughtfully crafted with a streamlined appearance, featuring a soft-close door that enhances usability and durability.

In conclusion, the Bosch DS9400 dishwasher combines powerful performance with innovative features and design excellence. Its quiet operation, flexibility in loading, smart technology, and efficient cleaning make it a top choice for those seeking a reliable appliance that meets the demands of a modern kitchen. Whether you're washing delicate glassware or heavy-duty cookware, the Bosch DS9400 stands out as an appliance that delivers exceptional results every time.