Product Information SM 210 LSN RW | PI - 32.52c |
|
|
1.Product description
Call points SM 210 LSN RW are used for manual alarming.
Manual call points SM 210 LSN RW are used within the Local Security Network LSN in association with fire detection central units.
Manual call points SM 210 LSN RW are available in 3 versions:
-SM 210 LSN RW, with back box for indoor surface mounting
-SM 210 LSN RW, with bezel for indoor flush mounting
-SM 210 LSN RW, with back box for outdoor surface mounting
2.Features
DAlarm initiating by pushing (breaking) the glass plate ⇒ injury protection by foilcoated glass plate
DDetector request routines with evaluation and multi data transmission
DDetector identification and address reported at the fire panel in the event of an alarm for a faster fire localization.
DAlarm indication at the detector via a flashing red LED
3.Planning notes
DManual call points should be installed in easy visible and accessible places.
DManual call points should be illuminated adequately by daylight or another light source (inclusively safety light if present).
DManual call points should be installed in rescue- and escaping corridors (i.e. exits, passages, stairways).
3.1. Maximum connectable detectors
Because of the different current consumption of LSN elements out of the LSN data- line the maximum current consumption value per LSN loop is absolute to aboden.
For limit values please refer to the product information of the used fire detection central unit.
3.2. Standards, guidelines, projecting recommendations
See standards, guidelines and projecting recommendations for installation place and so on.
Heed the regulations of the local fire brigades.
| |
| A2.en / 29.12.2004 |
Seite 3 von 12 |