Hearth and Home Technologies CR36D, CL36D manual Table of Contents, Safety Precautions

Page 2

 

CL36D AND CR36D INSTALLATION INSTRUCTIONS

 

Table of Contents

 

 

Design and Installation Considerations

3

A. Listings and Code Approvals

4

B. Description of the Fireplace System

4

C. Fireplace System Components

5

D.

Pre-Installation Preparation

10

E.

Chimney Requirements

12

F.

Installation of Fireplace

15

G.

Constructing a Chase

22

H.

Operating Instructions

25

I.

Maintenance Instructions

29

 

Index

31

 

Warranty

32

CAUTION:

Do not expose the fireplace to the elements (i.e. rain, etc.) and keep the fireplace dry at all times. Wet insulation will produce an odor when the fireplace is used.

SAFETY PRECAUTIONS

1.Please read these installation instructions completely before beginning installation procedures. Failure to follow them could cause a fireplace malfunction resulting in serious injury and/or property damage.

2.Always check your local building codes prior to installation. The fireplace installation must comply with all local, regional, state and national codes and regulations.

3.An adequate supply of replacement combustion air from outside the house must be available to the fire for the fireplace to operate properly. To achieve this, the use of the optional outside air kit is highly recommended.

In the event the home is unusually tightly sealed, the optional combustion air kit may not provide all the air required to support combustion. Hearth Technologies Inc. is not responsible for any smoking or related problems that may result from the lack of adequate combustion air. It is the responsibility of the builder/ contractor to ensure that adequate combustion air has been provided for the fireplace.

4.This fireplace must be installed with the Hearth Technologies Inc. (HTI) SL Series Chimney System.

The chimney system must always terminate outside the building. Be sure to follow all chimney specifications given in these installation instructions.

5.NEVER leave children unattended when there is a fire burning in the fireplace.

6.This woodburning fireplace is built for solid fuel only. NEVER use gasoline, gasoline type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids in this fireplace. Keep any flammable liquids a safe distance from the fireplace.

7.DO NOT use chimney cleaners or flame colorants in your fireplace.

8.The flue damper must be open at all times when the fireplace is in use.

9.While servicing this fireplace, always shut off any electricity or gas to the fireplace. This will prevent possible electric shock or burns. Also, make sure the fireplace is completely cooled before servicing.

10.To ensure a safe fireplace system and to prevent the build up of soot and creosote, inspect and clean the fireplace and chimney prior to use and periodically during the burning season. See page 29 for cleaning instructions.

12538 Rev D

2

02-02

Page 1 Page 3
Image 2
Page 1 Page 3
Contents CL36D and CR36D Table of Contents Safety PrecautionsDesign and Installation Considerations Heatilator fireplace system consists of the following Listings and Code ApprovalsDescription of the Fireplace System Optional Components IncludeSystem Components Fireplace ComponentsFireplace Dimensions AK14 Outside Air Kit Chimney Components CAK4ARF371 Roof Flashing 12 to 12/12 Pitch Chimney SectionsFirestop Spacer Straight Attic Insulation ShieldChase Top Chimney Air Kit PRE-INSTALLATION Preparation Fireplace Locations and Space RequirementsFraming the Fireplace Framing the FireplaceChimney Requirements Sidewalls/SurroundsSL306 SL312 SL318 SL324 SL336 SL348 Using Offsets and ReturnsOffset Chart Number of Sections Required Dimensions reflect effective heightChimney Height Requirements above roof line Placing the Protective Metal Hearth Strips Installation of FireplacePositioning the Fireplace Leveling the FireplaceInstalling Firestop Spacers Assembling Chimney SectionsDouble-checking the Chimney Assembly Attic Insulation Shield Securing the Chimney SystemInstalling the Chimney Air Kit Installing the Roof FlashingInstalling the Outside Air Kit Marking the Exit Point of the RoofCompletion of the Enclosure Gas Log/Lighter ProvisionsHearth Extension Factory Built Hearth ExtensionMantel Position the Hearth ExtensionFinishing Material Glass DoorsConstructing a Chase MaterialsChase Top Termination CapInstalling an ST375 Square Termination Cap Outside Air Operating InstructionsGeneral Information Flue DamperWood Fuel GrateFirescreen Proper Operating Positions of Bi-Fold DoorsDraft Problems Starting a FireFlue Draft Disposal of Ashes Maintenance InstructionsChimney Cleaning Creosote and SootHOMEOWNER’S Notes Index How to Obtain Service Limited WarrantyReplacement Parts Advantage As part of its

CR36D, CL36D specifications

Hearth and Home Technologies (HHT) has long been a leader in the fireplace market, and their CL36D and CR36D models exemplify the company's commitment to quality and innovation. Both models are part of the brand's extensive range of gas fireplaces, designed to offer an efficient and aesthetic heating solution for modern homes.

The CL36D, known for its linear design, measures 36 inches wide and is ideal for creating a stunning focal point in any living space. Its contemporary aesthetic features a clean face and a wide viewing area, allowing for an unobstructed view of the flames. The CR36D, on the other hand, brings a traditional touch with its classic stove-like appearance. This model can seamlessly integrate into various interior designs, catering to homeowners looking for a more classic or rustic focal point.

One of the standout features of both the CL36D and CR36D is their advanced burner technology. HHT has implemented a unique burner design that provides a realistic flame presentation, enhancing the overall ambiance of the space. These models also come equipped with an efficient heating system, capable of warming a substantial area while maintaining energy efficiency. The fireplaces utilize propane or natural gas as a fuel source, providing convenience and ease of use.

Another significant characteristic of these units is their versatility. Both the CL36D and CR36D can be customized with various media options, including traditional logs, glass beads, or contemporary stones. This flexibility allows homeowners to personalize their fireplace to match their unique style and preferences.

Safety features are also a priority for Hearth and Home Technologies. Both fireplaces are equipped with a safety shut-off system, ensuring that the unit will turn off in case of any malfunctions. Additionally, they can be integrated with optional remote controls and wall switches, allowing for easy operation from anywhere in the room.

In summary, the Hearth and Home Technologies CL36D and CR36D offer a blend of contemporary and traditional designs, advanced burner technology, energy efficiency, and customizable features. Whether you prefer a sleek, modern look or a more classic style, these models provide an exceptional heating solution while enhancing the aesthetic appeal of your home. With their impressive safety features and user-friendly operation, the CL36D and CR36D are excellent choices for anyone looking to invest in a high-quality gas fireplace.
Top Page Image Contents