Baxi Bermuda BBU HE Site Survey Form

Bermuda BBU HE

Baxi Bermuda BBU HE Site Survey Form

NB: If the answer is NO to any of the points below then read the adjacent comments for further guidance.

YesNo Comments

Is the gas supply natural gas?

Is the boiler fitted to a fully pumped system?

Is the flow and return connection on the

left hand side of the boiler? (looking at the boiler)

Does the system incorporate a bypass?

No LPG model currently available.

If the heating system is a gravity hot water pumped heating system it must be converted to a fully pumped system Y or S Plan.

If the existing pipe work is connected from the right hand side then the optional extra pipe work kit may be required to facilitate installation.

A pressure operated bypass will be required if the minimum flow rate is lower than 8.3 litre/minute.

Is the boiler installed to a Class 1 Flue?

Check builders opening (see comments) .

225mm x 225mm (9" x 9") brick or 175mm (7") salt glazed lined flue is required.

570mm (22") height, 584mm (23") width, 305mm (12") depth is the minimum size of the builders opening. If only the minimum depth is available a range of spacer kits or rebated surrounds are available for the firefront (see page 13 of the Baxi Bermuda BBU HE brochure).

Is an existing fire surround installed? (see comments).

Does the existing fire have an electric light effect?

Is there a 13 amp socket in close proximity to the existing fire and boiler location? (see comments)

Will there be a clearance of 150mm from the

BBU flue terminal to an adjacent terminal?

Measure and check the flue length and its path. (see comments) .

Is there a waste drain point close to the boiler location? (see comments) .

The minimum fireplace opening size is 558mm height (22") x 406mm width (16") If installing with minimum fireplace dimensions provision will need to be made for access to the gas service cock and inlet test point. The surround will need to be removed to allow access for installation of the BBU.

The boiler will require a 3 amp permanent live as well as a switched live feed from the same source to operate satisfactorily.

The fire will require a separate13 amp supply.

150mm clearance is required from the BBU flue terminal to an adjacent terminal.

There are 2 concentric flue system kits available, 10 metre and 12.5 metre. These lengths may be cut shorter but cannot be extended beyond their specified length.

The boiler incorporates a sump pump for the removal of condensate. The pump can lift condensate vertically 2.5 metres (as measured from the case outlet of the boiler.) Any horizontal run should be kept as short as practicable with a miniumum of 3 degrees on all gravity falls.

For guidance on maximum horizontal runs and number of elbows please refer to Baxi's Installation Instructions at www.baxi.co.uk.

Please cut here

BBU HE specifications

The Baxi Potterton BBU HE stands out in the realm of heating solutions, renowned for its high efficiency and reliability. Designed primarily for domestic use, this balanced flue boiler is a popular choice among homeowners looking for efficient and space-saving heating options.

One of the main features of the Baxi Potterton BBU HE is its compact design. Measuring just a fraction of the size of traditional boilers, this unit can easily be installed in various locations around the home, including small utility rooms or cabinets. This flexibility allows for greater use of space without compromising on performance.

The BBU HE boasts a high-efficiency rating, categorized as an A-rated appliance. This characteristic ensures that homeowners benefit from lower fuel bills, as the boiler makes optimal use of energy while producing minimal emissions. This makes it not only cost-effective but also environmentally friendly, aligning with modern standards for sustainable living.

This balanced flue boiler utilizes advanced technology for enhanced performance. The BBU HE is equipped with a modulating gas valve, which adjusts the gas supply based on the heating demand. This functionality allows the boiler to operate at varying levels of output, facilitating energy savings and reducing wear and tear on components over time.

Furthermore, the Baxi Potterton BBU HE features a built-in frost protection mode, which ensures functionality even in freezing temperatures. This feature is invaluable for homeowners in colder climates, as it protects the boiler from potential damage due to freezing conditions.

Maintenance is made simpler with the BBU HE thanks to its user-friendly design. The boiler incorporates a straightforward control panel, providing easy access to key settings and diagnostics. Regular servicing is facilitated by the boiler's accessible components, helping to ensure longevity and optimal performance.

Overall, the Baxi Potterton BBU HE exemplifies a modern heating solution that combines efficiency, compactness, and advanced technology. With its user-focused design and eco-friendly credentials, it’s an excellent choice for homeowners looking to enhance their heating systems while also being mindful of energy consumption and environmental impact. The BBU HE does not merely heat homes; it represents a progressive approach to domestic heating in today's energy-conscious world.