Temperature Control, Flame Failure Reset

Fig. 9

Central Heating

Temperature Control

PREHEAT	PREHEAT
OFF	OFF
ON	ON
Fig. 10	Fig. 11
Domestic Hot Water	Domestic Hot Water
Pre-Heat Control	Pre-Heat Control
ON Position	OFF Position
Flame Failure
Neon

30o 40o 50o 60o 70o 80o

Fig. 12

Domestic Hot

Water Neon

Reset

Reset Position

Fig. 13

3.0Operating the Boiler

3.2Temperature Control

1.Central Heating: The central heating hot water flow temperature can be adjusted between 30° C (± 5° C) minimum and 85° C (± 5° C) maximum.

2.Turn the control knob clockwise to increase the temperature (Fig. 9).

3.In normal winter usage we recommend that the central heating temperature be set at maximum.

4.Domestic Hot Water Pre-Heat: To enjoy optimum performance of the boiler the pre-heat control should be set fully clockwise to the ON position (Fig. 10).

When there is a demand for hot water it will be supplied at approximately 65° C instantaneously.

5.Turning the control 15° clockwise from the OFF position will activate the pre-heat feature. Hot water will be supplied at approximately 35° C instantaneously.

6.To increase the temperature turn the control further clockwise. For example, when set 90° clockwise the boiler will supply hot water at approximately 44° C instantaneously. At a position 180° from clockwise (i.e. straight down) the hot water will be supplied at 52° C instantaneously.

7.When the control is set anywhere between 15° clockwise from the OFF position and the ON position, the pre-heat feature will operate.

8.With the control in the OFF position (Fig. 11) the pre- heat feature will not operate. Hot water will be supplied at approximately 50° C.

9.The pre-heat feature will function with the selector switch in either operating position. This is indicated by the domestic hot water mode neon flashing (Fig. 12).

10.The flow rate can be reduced down to as low as 2.5 litre/min. The boiler will still recognise the need to heat the water.

3.3Flame Failure Reset

1.The red flame failure neon () will illuminate in the event of the burner failing to light, when incomplete

lighting of the burner occurs or blockage of the condensate drain (Fig. 12).

2.Turn the selector switch fully anti-clockwise against the spring pressure to the ‘Reset’ position for at least two seconds and release (Fig. 13). Set the selector to the required position to light the boiler.

3.If the flame failure light illuminates repeatedly a fault is indicated with either the boiler, the gas supply or the condensate drain. Your Installer or Service Engineer should be called as soon as possible.

80 HE, 105 HE specifications

The Baxi Potterton 105 HE is a popular choice for homeowners seeking an efficient and reliable heating solution. Known for its innovative technology and user-friendly features, this boiler is designed to meet the demands of any household while ensuring comfort and energy efficiency.

One of the standout features of the Baxi Potterton 105 HE is its impressive energy efficiency rating. With a high Seasonal Efficiency of Heating (SEDBUK) rating, it can significantly reduce energy bills by maximizing heat output while minimizing fuel consumption. This is particularly important for environmentally conscious consumers looking to decrease their carbon footprint.

The boiler employs a compact design, making it suitable for various installation scenarios, including tight spaces. Weighing relatively light and equipped with rear flue option, it facilitates easier placement in kitchens, utility rooms, or lofts without requiring significant alterations to existing layouts.

The Baxi Potterton 105 HE boasts a reliable and user-friendly digital display, allowing users to monitor their heating system effortlessly. It features a built-in time clock that can be programmed for heating schedules, providing flexibility and ensuring warmth when needed most. Additionally, a wide range of system control options is available, enabling integration with smart thermostats for even greater control over home heating.

This boiler is equipped with a modulating burner, which adjusts the heat output based on the heating demand. This technology enhances comfort by maintaining consistent temperatures and reducing the risk of overheating or underheating rooms. It further supports efficiency by using only the necessary amount of fuel during operation.

Maintenance is simplified with the Baxi Potterton 105 HE, which is designed with easy access points for servicing. The inclusion of fewer components in its construction helps minimize the likelihood of mechanical failures, promoting reliability and longevity.

Safety features are also paramount in the design of the Baxi Potterton 105 HE. It incorporates advanced diagnostics and safety cut-offs to protect both the appliance and the household from potential hazards.

Overall, the Baxi Potterton 105 HE combines energy efficiency, modern technology, and practical design to deliver a top-tier heating solution for today's homes. Its well-rounded features make it a wise investment for anyone looking to enhance their home comfort while remaining mindful of energy consumption.