III Ill, ROD and Float Switch Installation

ROD AND FLOAT

SWITCH INSTALLATION

See Figure 2 for stop positions.

1.Thread float rod into float until it is firmly hand tight.

2.Slide rod guide over float rod; follow it with a rod stop

bushing (A) set about eight inches down from the top of the rod.

3.Slide float rod up through the eye in the switch arm. Add a rod stop bushing (B) at the top of the rod.

4.Open large loop on rod guide and mount it around the column. Fasten with screw, making sure that the float rod hangs vertically from the switch and moves freely in the rod guide. Make sure the rod guide is tightly clamped.

5.Adjust rod stop bushings for designed level control.

6.Lift the rod up and down to be sure the switch will click and that the arm does not bind on the rubber bushings. The rod must also move freely in the guide.

7.Fill the sump and run pump through one complete cycle to check switch operation.

Rod Sto

Switch Arm

III Ill

Rod Stop (A)

Float Rod

Sump Cover

Rod Guide

Float

The switch unit operates as follows:

1.When the sump is dry, the float rod hangs from the switch alan. Its weight holds the switch off.

2.When the water rises in the sump, the float lifts the svdtch

rod. The buoyancy will push the switch arm up and turn the switch on.

3.When the water is pumped out of the sump, the float

drops down again. The weight of the float will allow the rod and switch arm to lower and turn the drainer switch

off.

DO NOT ALLOW PUMP TO RUN DRY

Pump should not be allowed to run dry prior to shutting off.

To do so voids the warranty and could ruin the pump.

If necessary, adjust the float so this will not happen.

ELECTRICAL CONNECTIONS

Risk of electric shock. The Sump Pump

has a 3-prong electric plug. The third prong is used to

ground the pump to prevent possible fatal shock. The

third prong should never be removed. Your electrical

outlet should be the 3-prong, polarized type with an

internal ground.

Pump must be wired into a 15 amp GFCI protected individ- ual branch circuit.

DO NOT USE AN EXTENSION CORD.

Testing for Ground

For your safety, check your outlet for ground using a Circuit Analyzer, (Figure 3). A Circuit Analyzer will tell you by a pat- tern of lights if the power, neutral, and ground wires are cor-

rectly connected to your outlet. It can also be used to check other outlets in your home. A Circuit Analyzer is available in the SEARS Electrical Department.

UL Listed

Analyzer

Outl_

Figure 3

8650194

Figure 2

390.303491, 390.303302 specifications

Sears has long been a staple in American retail, and its appliances are no exception. Two particularly notable products in their extensive line-up are model numbers 390.303302 and 390.303491. Both of these models are representative of Sears' commitment to quality and innovation in home appliances.

The Sears 390.303302 is a versatile appliance that stands out with its user-friendly design and efficient performance. One of its key features is its energy efficiency, which has been designed to reduce power consumption while maintaining high functionality. This model typically includes advanced temperature control technology, allowing users to easily adjust settings according to their needs. Additionally, the appliance often features ergonomic design elements, including intuitive controls and ample storage space, making it convenient for everyday use.

On the other hand, the Sears 390.303491 is distinguished by its enhanced capacity and robust construction. This model frequently comes equipped with cutting-edge technology, such as smart sensors that can automatically adjust the appliance's performance based on the load or usage patterns. This feature not only optimizes performance but also contributes to energy savings. The 390.303491 often highlights a sleek design, which blends seamlessly with modern home aesthetics while providing durability and ease of maintenance.

Both models typically focus on user convenience, featuring easy-to-read displays and simplified operation procedures. The construction materials used in these appliances are often high-quality, ensuring longevity and resistance to wear and tear, making them reliable choices for households.

In terms of safety features, both models frequently incorporate automatic shut-off systems that enhance user safety and prevent overheating. Additionally, these Sears appliances are designed with noise-reduction technologies, ensuring that they operate quietly, making them suitable for environments where noise is a concern.

Overall, the Sears 390.303302 and 390.303491 exemplify the brand's dedication to producing functional, durable, and efficient appliances that meet the needs of modern consumers. They reflect a blend of innovative technology and practical design that keeps them competitive in the dynamic landscape of home appliances, providing excellent value for households looking to enhance their kitchen experience.