Sears 625.34855 Water Softener START-UP 1C.PROGRAM the Timer, SET Water Hardness Number

SECTION 1

WATER SOFTENER START-UP

1C.PROGRAM THE TIMER

2.SET WATER HARDNESS NUMBER:

•Press the #1 SELECT button once to

display 15 (flashing) and HARDNESS.

:3. SET RECHARGE (REGENERATION) TIME:

•Press the # 1 SELECT button to display 2:00 AM (flashing) and RECHARGE TIME.

The	grains		per	gallon		(gpg)	_,, ,,,,
							LP4_.
hardness		of	your		water	sup-	;
ply	is on your			water analysis			;
report.		Be sure		to	enter	water	i
test	results		on		page	2, for	--'---
future		reference.

NOTE:

If your water supply contains iron, compensate

for it by adding to the water hardness number. For example, assume your water is 15 gpg hard and contains 2 ppm iron. Add 5 to the hardness number for each I ppm of iron. In this example, you wouhl use 25

At the 2:00 AM RECHARGE

TIME setting, the softener be-

gins regeneration (see pages 12 and 13) at 2:00 AM, ending no later than 4:00 AM. This is a

good time in most households

because water is not being

used (see AUTOMATIC BY- PASS, page 14). If a different

RECHARGE TIME setting

would be better for your

household, do the following.

.....=, '4.-.-2:DI,, "

f

for your hardness n umber.

15 9P9 hardness

2 ppm iron x 5 = 10 +10

(times) 25 HARDNESS NUMBER

• Press the _UP/DOWN _buttons to set your

water hardness number in the display. The DOWN button moves the display to 1. The UP button moves the display to the highest setting

(see maximum setting for your model in the specifications).

NOTE:

Each press of the UP/DOWN button changes the

display by 1 between 1 and 25. Between 25 and

the highest number, the display changes 5 at a

time- 25, 30, 35, etc. Holding the UP or DOWN button in changes the display twice each second.

• Press	the	[]UP/DOWN		{_)buttons	to	set	the
desired	RECHARGE		starting	hour.	Be	sure	to
observe	the	AM-PM as	you	did when	setting		the
present	time	of day.

NOTE:

Each	press		of	the UP/DOWN			buttons	changes
the	display		1	hour.	Holding		the	buttons	in
changes		the	display		twice	each	second.
• Press		the #1		SELECT		button once again, to
return		the	present		time,	and	RECHARGE		TO-
NIGHT		in	the	display.

IF YOU NEED HELP PROGRAMMING THE TIMER, CALL TOLL FREE, NUMBER

1 - 800- 426- 9345.

SEE PAGES I0 AND II FOR OTHER FACE PLATE TIMER FEATURES.