AR-15 Features, Safety Information | Furman Sound specification

AR-15 VOLTAGE REGULATOR / POWER CONDITIONER

Congratulations on your purchase of a Furman AR-15 AC Line Voltage Regula- tor / Power Conditioner. The AR-Series regulators are designed speciﬁcally for any audio, video, or computer rackmount system requiring clean, ﬁltered, and regu- lated AC power for optimum operation.

AR-15 FEATURES

•Provides nine regulated, conditioned AC outlets—eight on the rear panel and one on the front

•Series mode protection plus (SMP+) with extreme voltage shutdown (E.V.S.)

•LiFT (Linear Filtering Technology) with zero ground contamination

•Eight rear panel outlets and one front panel outlet

•BNC connector on the rear panel allows you to attach any standard (12VAC 0.5 amp) gooseneck lamp to illuminate the rear of your rack

•Extreme Voltage Shutdown indicator LED

•Output In Regulation indicator

•Ten-LED bargraph input voltmeter

•Fast-acting user-accessible circuit breaker protects against overload or shorts

•Very low stray magnetic ﬁeld leakage

•Input capacity is 15 A; output capacity is 12 to 15 A

SAFETY INFORMATION

To obtain best results from your Furman AR-15 please be sure to read this manual carefully.

WARNING: To reduce the risk of electrical shock, do not expose this equipment to rain or moisture. Dangerous high voltages are present inside the enclosure. Do not remove the cov- ers. There are no user serviceable parts inside. Refer servicing to qualiﬁed personnel only.

The lightning ﬂash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated danger- ous voltage within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock.

IMPORTANT SAFETY

INSTRUCTIONS

PLEASE READ PRIOR TO INSTALLATION

1.Please read and observe all of the safety and operating instructions before the AR-15 is operated. Retain these instructions for future reference.

2.The AR-15 should not be used near water

— for example, near a bathtub, kitchen sink, in a wet basement, near a swimming pool, etc.

3.Do not place the AR-15 near heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.

4.Route the power cord and other cables so that they are not likely to be walked on, tripped over, or stressed. Pay particular at- tention to condition of cords and cables at plugs, and the point where they exit from the AR-15. To prevent risk of ﬁre or injury, dam- aged cords and cables should be replaced immediately.

AR-15 specifications

Furman Sound AR-15 is a highly regarded power conditioner specifically designed for professional audio applications. This device plays a crucial role in maintaining the integrity of audio and video systems by providing a stable and clean power source. One of its main features is its ability to filter out noise and voltage spikes, which can cause interference and potentially damage sensitive equipment.

One of the standout technologies in the AR-15 is its Linear Filtering Technology (LiFT). This advanced filtering process significantly reduces common-mode and differential-mode noise, ensuring that the audio signal remains pristine. The result is a dramatically improved sound quality that professionals rely on in live performances, recording studios, and broadcast applications.

Another key characteristic of the Furman AR-15 is its durable construction. Built with rugged metal housing and a design that focuses on durability, the device is well-suited for the rigors of touring and frequent relocations. Its compact 1U rack-mount design allows for easy integration into standard equipment racks, making it a convenient choice for professionals looking to streamline their setups.

The AR-15 also features a series of outlets, which include 10 filtered and surge-protected AC outlets. This allows users to connect multiple devices while ensuring they are all protected from surges and spikes. Additionally, the device has a built-in LED voltage meter that provides real-time information on the incoming voltage levels, enabling users to monitor their power conditions accurately.

To further enhance usability, the device includes a front panel with resettable circuit breakers, which provide protection against overloads while being easy to reset in case of an issue. This ensures that users can maintain uninterrupted operation, allowing for a seamless performance.

In conclusion, the Furman Sound AR-15 is a powerful and reliable tool for audio professionals. With its advanced filtering technology, durable design, and thoughtful features, it provides an essential safeguard for audio equipment, ensuring optimal performance and longevity. Whether for live sound, studio recording, or broadcast applications, the AR-15 stands as a trusted partner in achieving top-notch audio quality.