Honeywell CT3500/CT3595 Operating Your Thermostat, Change Temperature Setting Indefinitely Hold

STEP 11. OPERATING YOUR THERMOSTAT

Change Temperature Setting Until the Next Program Period (Temporary Change)

❑Press or until the screen shows the desired temperature setting.

NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is dis- played. Temporary appears in the display. The setting cancels when the next program period starts or when

Run

you press Program .

Change Temperature Setting Indefinitely (Hold)

❑Move the System switch to the desired position (Heat or Cool).

❑Press Hold Temp then or to change your setting if desired. (The display changes from showing the setpoint temperature to room temperature after approximately three seconds).

Run

❑To cancel “Hold” press Program .

Change the Temperature Setting Until a Designated Day and Period (Vacation Hold)

❑Press Hold Temp twice.

❑Press or until the display shows the desired temperature setpoint.

❑Press Time until the desired number of days that you will be away (1 through 255) is displayed.

❑ Press Wake , Leave , Return or Sleep to select the program period when you want the program to restart.