Honeywell CT3200 Installation, Verify that you have the right thermostat, Recycling Thermostat

Page 2

Fig. 1

MERCURY

SWITCH

M3701

Recycling Thermostat

If you are removing an old thermostat that contains mercury in a sealed tube (Fig. 1), do not place the old thermostat in the trash. Contact your local waste management authority for instructions regarding recycling and the proper disposal of the old thermostat.

Installation

Verify that you have the right thermostat

Make sure that the CT3200 is the right thermostat for your heating/cooling system. Read the compatibility chart below to determine which system you have. If your system is not compatible with the CT3200, the table recommends an alternate Honeywell model. If you are unsure what type of thermostat is right for your system, visit us on the Web at www.honeywell.com/yourhome or call Honeywell Customer Relations at 1-800-468-1502.

Heating/Cooling System

Compatible

Alternate

with CT3200?

model

 

 

 

 

Conventional

Yes

 

Single stage systems that include warm air furnaces and hot water.

 

 

 

 

 

Electric Baseboard

No

CT1950 for

Electric powered heating strips located just above the floor, usually 120 to 240 volts.

 

240 volts

 

 

 

Steam

No

CT3600

A steam boiler with radiator heat.

 

 

 

 

 

Heat Pump

No

CT3600

Heating and cooling are produced from the same outdoor unit (compressor) with no

 

 

auxiliary or backup heat.

 

 

 

 

 

Multistage Heat Pump

No

CT3611

Heating and cooling are produced from the same outdoor unit (compressor) with

 

 

auxiliary or backup heat.

 

 

 

 

 

Multistage Conventional

No

See your

A heating or cooling system with more than one stage.

 

contractor

 

 

 

2 INSTALLATION

69-0653-6

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation and Programming Instructions Table of ContentsRecycling Thermostat InstallationVerify that you have the right thermostat Prepare for installation Required tools and supplies Optional toolsRemove the old thermostat Check your progressInstall the mounting plate Fuel Switch Set the thermostat for your type of heating systemHeating System Table Wire the thermostat terminalsType of system Screws a and B Fuel switch Install the batteries Mount the thermostatThree thermostat wires Special wiring instructionsSix or more wires Wires that are not connected to the old thermostatFive wires connected to the old thermostat Descriptions ProgrammingFaceplate illustration and descriptions Learn about the programming features Set the current time and dayProgram period Description When available Programming tipsSchedule Period Program the heating scheduleHeating Program Program the cooling schedule Cooling ProgramVerify that your cooling system works Check out the systemVerify that your heating system works Operation Set the Fan and System switchesSetting Result Change the clock for Daylight/Standard timeIf you see Batteries are You should Switch Setting ResultReplace the batteries Hold a temperature indefinitely Override the program settingsChange the temperature temporarily Check programs Check the current programmed temperatureCancel a program Change a program permanentlyFrequently asked questions ThenCustomer assistance Limited warranty Home and Building Control

CT3200 specifications

The Honeywell CT3200 is a sophisticated thermostat designed for residential heating and cooling systems, offering both convenience and efficiency. Its features cater to homeowners looking to optimize their indoor climate while managing energy costs effectively.

One of the prominent features of the CT3200 is its ability to program schedules. This programmable thermostat allows users to set specific heating or cooling schedules for different times of the day, ensuring that the home remains comfortable when occupied while conserving energy when no one is home. The ability to program up to four different periods per day allows for great flexibility, accommodating varying lifestyles.

The CT3200 utilizes advanced temperature sensing technology, providing accurate temperature readings for improved climate control. This ensures that the home remains at the desired temperature without unnecessary fluctuations, enhancing comfort and reducing energy consumption.

Energy efficiency is at the forefront of the CT3200’s design. It is compatible with most heating and cooling systems, including gas, electric, and heat pump systems. This compatibility allows homeowners to upgrade their thermostats without worrying about system incompatibility. Furthermore, the CT3200 can help in optimizing energy usage, potentially leading to significant savings on utility bills.

The user interface of the CT3200 is intuitive and user-friendly. It features a large display that shows the current room temperature and setpoint temperature simultaneously, making it easy to read at a glance. The touchscreen interface provides quick access to settings, enabling users to adjust their schedules and preferences easily.

Another notable characteristic of the Honeywell CT3200 is its compatibility with various home automation systems. Integration with smart home technologies allows homeowners to control their thermostat remotely using smartphones or tablets, providing added convenience and ensuring that homes are comfortable upon return.

Furthermore, the CT3200 comes equipped with a low battery indicator and a filter change reminder, promoting proactive maintenance to ensure optimal performance. These thoughtful features enhance the overall user experience, making the Honeywell CT3200 an excellent choice for homeowners seeking both efficiency and ease of use.

In summary, the Honeywell CT3200 thermostat combines advanced scheduling capabilities, energy-efficient technology, user-friendly design, and compatibility with various heating and cooling systems, making it an ideal choice for anyone looking to enhance their home’s comfort and efficiency.
Top Page Image Contents