Honeywell CM901 manual How do I set one temperature for the whole day?, What is Optimum Start?

Page 12

FAQ’s & TROUBLESHOOTING

How do I change the batteries on the CM901 when they run out?

The thermostat constantly monitors the battery power level, which typically last for about 2 years before needing replaced. When the power is running low a flashing symbol will be displayed on the screen. To change the batteries follow the steps in the above section (‘STEP 1: Installing the Batteries’ on page 3), replacing the used batteries with new ones in step c.

Note: While changing the batteries your program settings will be stored but you may need to adjust the time and date settings to be correct.

How do I set one temperature for the whole day?

To operate as a simple thermostat with one temperature for a period of time, move the slider switch to the MAN position. Adjust the manual temperature by pressing the or buttons. This can be set anywhere from 5°C to 35°C in 0.5°C steps. The thermostat will continue to maintain this temperature until another operating mode is

selected or the temperature is adjusted.

What is Optimum Start?

Optimum Start is a program which ensures that the optimum temperature conditions are achieved at the required times. This is an Energy Efficiency feature that adjusts the start time of your heating system depending upon how cold it is. For example, on cold days your heating system will be started earlier to ensure that your home is warm when you get up (at the target temperature) and on warmer days the heating system will be started later to save energy. So, if the Optimum Start Feature is used, then the time / temperature settings which are entered into the thermostat should be set to when you want to be warm by and not when you want the heating system to start.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents CM901 User Guide Controls Layout Contents Installing the Batteries To install the BatteriesSetting the Date and Time Running the Built-in Heating ProgramTo set the Date and Time Built-in Heating Program Reviewing the Heating ProgramModifying the Heating Program To press or buttons To disable time periods To enable time periodsDisabling / Enabling Time Periods Choosing the Operating Mode Adjusting the TimeDuring Normal Operation Using the Special Functions Temperature OverrideHoliday Function To set the Holiday functionChanging the User Parameters To change any of these user’s parametersIi Reset the built-in program to the factory default Iii Enable or disable summer/winter time changeChange the time format How do I set one temperature for the whole day? What is Optimum Start?Can I use my CM901 to control my air-conditioning system? Remote Temperature Sensor Accessory Troubleshooting Guide Symptom Possible Cause RemedyAn explanation for householders What is a Programmable Room THERMOSTAT? 42010943-103 R1

CM901 specifications

The Honeywell CM901 is a highly efficient, programmable room thermostat designed for residential heating systems. This versatile device caters to the needs of homeowners by combining user-friendly features with advanced technology to ensure optimal climate control in living spaces.

One of the standout features of the CM901 is its ability to offer seven-day programming. Users can set different heating schedules for each day of the week, allowing for flexibility according to their lifestyle. This functionality is particularly beneficial for families with varying routines, enabling energy savings during times when the home is unoccupied. Users can program the thermostat to reduce heating in the mornings when they are away and ramp up the temperature just before they return home.

The CM901 supports a wide range of heating systems, including gas, oil, and electric boilers, as well as underfloor heating systems. This compatibility makes it suitable for a variety of homes and heating setups, ensuring that it can meet the unique needs of different households. Furthermore, its easy installation process allows homeowners or contractors to set it up with minimal hassle.

Equipped with an intuitive interface, the CM901 features a clear LCD display that shows the current room temperature and set point at a glance. The backlit screen enhances usability, enabling users to read the display in low-light conditions. The device also allows for manual override, making it convenient for users to adjust settings on-the-fly without interfering with their programmed schedule.

Energy efficiency is a prime focus of the CM901, as it helps reduce heating costs while maintaining comfort. Its precise temperature control and programming capabilities ensure that heating is only used when necessary, leading to reduced energy consumption. This not only benefits the environment but also helps homeowners save money on their energy bills.

In terms of build quality, the Honeywell CM901 boasts a sleek and modern design that fits seamlessly into contemporary home decor. Its durable construction ensures longevity, offering reliable service for years to come.

Overall, the Honeywell CM901 stands out as a practical solution for homeowners seeking a blend of comfort, efficiency, and ease of use in their heating systems. With its programmable features, adaptability, and user-friendly interface, the CM901 is an excellent choice for those looking to enhance their indoor climate control experience.
Top Page Image Contents