Memorex MD6460 manual To Program the Memory UP to 24 Tracks, Play/Pause, Search

		CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
1		3	1	2		3
		2			1	2
With a CD inserted, press the				Select the first track to be played back
PLAY/PAUSE (®p)/POWER ON button 1				using the SKIP/SEARCH o 1 or			❷
to turn the unit on and press the STOP				button, then press the PROG button ❸
(■)/POWER OFF button 2 to stop auto				again. Repeat this step to program
playback.	Press the PROG button 3; the
Track (00), program number (P-01) and				additional tracks up to a maximum of 24
PROG indicator will appear in the CD				tracks.
display.				4
3
		1			1	2
			2
			3
Press	the		PLAY/PAUSE	To skip forward or backward through
(®p)/POWER ON button ❶ to begin				the programs, press the SKIP/
Programmed playback and adjust the				SEARCH	1 or	❷ button. When
VOLUME control ❷ and DBBS switch				the disc is through playing, it will stop.
❸ as desired.

NOTES:

• Press the STOP (■)/POWER OFF button to stop the disc before it is finished.

• As each program is played, the track number is shown in the display.

• To clear the memorized program, press and hold the PROG button while in the Stop mode until the PROG indicator disappears in the display.

• Programming is the ability to preselect the order in which a series of tracks will be played.

• Each track may be stored in the program memory as many times as desired (up to 24 tracks).

12