Memorex MC2864 manual Installation, AC Connection, Inserting Batteries

INSTALLATION

AC CONNECTION
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
Unravel the AC cord and connect it to a		AC Outlet
conveniently located AC outlet having 120V and
60Hz only. “12:00” will appear in the display.
NOTE: If the AC plug does not fit into a	AC Plug
nonpolarized outlet, do not file or cut the wide
blade.

INSERTING BATTERIES
Two (2) “AAA” size batteries should be used to provide a backup for the clock and
alarm time for this unit as follows:
1. Open the Battery Compartment door by pushing in on the tab, then removing
	the Battery Compartment door.
2. Insert two (2) “AAA” batteries as shown.
	Alkaline batteries are recommended for the
	longest playing time.
3. Replace the Battery Compartment door.
NOTES:
•	The batteries are used to backup the clock	+	–
	and alarm time when the AC plug is
•	disconnected or there is a power failure.	–	+
	If the batteries are low or no batteries are
	inserted, "BATT. LOW" will blink in the
	display.
	BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the
	battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
	Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
	prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
	rupture. (Follow battery manufacturer’s directions.)

6