Honeywell 4500 manual Turning the Set-Back On and Off

Turning the Set-Back On and Off

The set-back feature of the 4500 thermostat works automatically when you leave the premises and the security system is ARMED AWAY. However, sometimes you may want to override this feature. You can turn off the set-back at any time, while still on the premises or off.

For example, on a very hot day, you may want the premises temperature to be restored to the more comfortable normal settings by the time you return home from work instead of remaining at the more economical set-back temperature until you arrive. You would do the following:

1.Call the security system before returning home.

2.Enter your 2-digit phone code and 4-digit user code as requested by the system.

3. Press

#

9

9

to enter the Thermostat Mode Menu.

4.At the “To Turn Set-Back Off, Enter 3” prompt, press

3

.

This command temporarily deactivates the set-back function until you return home.

5.You can exit the Thermostat Mode at this point by pressing at the exit prompt.

0

6.The premises cooling system will now be under the original thermostat’s control with the premises temperature being lowered to the more comfortable setting.

When you turn off the set-back, you are only doing so temporarily. When you return home the thermostat mode menu resets itself automatically so that when you again exit the premises with the security system in the ARMED AWAY state, the premises temperature will go to the programmed 4500 thermostat setting.

In the example above, if you change your mind and decide not to return home early, you can turn the thermostat set-back to on again by phone.

8