|
|
|
Features | Additional Features | 6 |
| ||
|
|
Armchair Programming
There is no need to stand at the wall where the thermostat is mounted while programming or changing settings. Simply remove the thermostat from the wall and make the necessary changes in the comfort of a chair. You can also set your programming and settings before you even install the thermostat.
Power Failure Protection
In the event that power is lost, the batteries will act as backup, saving your settings and programs.
Backlight
Your thermostat has a white LED lamp that backlights the display for easy viewing in the dark. When any key is pressed, the backlight will be activated. The display will stay illuminated for 15 seconds after the last key is pressed.
System Protection
To protect your system from cycling, system turning on and off rapidly, your thermostat will prevent your system from turning back on for up to 3 minutes after it has been shut down.
Reset
In situations where your thermostat may not seem to be operating properly or if you just want to reset and start over, press and hold the 
and 
buttons for 5 seconds until the screen flashes “Updated!”. This will restore the thermostat to factory condition.
48