|
| |
Setup | 4 | |
Setting Day and Time | ||
|
Once you install the batteries, the thermostat will prompt you to set the current day and time.
1. You will notice that “Mon” will be flashing at the top left of your screen. Use the or buttons to move to your current day of the week and press the Next button to advance to the next step.
2. Use the or button to change between am and pm. Choose Next to advance.
3. Next you will select your current hour by using the or buttons. The Next button advances you to the next step.
4. Set your minutes using the | or | and press | Home | to finish or Back | if you need to |
|
|
| Done/ |
|
|
make a correction to a previous step.
5. When finished, the thermostat will show “Updated!” to confirm your settings are saved.
6. Your thermostat will next prompt you to set your programming, see page 14 step 2 if you wish to alter your programs at this time.
10