Trane TAYSTAT 540 manual Programming Your Thermostat, Setting the Current Day and Time

Page 4

PROGRAMMING YOUR THERMOSTAT

CLOCK

Setting the Current Day and Time

To set or reset the current day and time, follow these instructions.

IMPORTANT

Always press the keys with your fingertip or similar blunt tool. Sharp objects like pen and pencil points will damage the keyboard.

Note: To exit the programming mode at any time, press Hold.

1.To set Current Time, press Select twice. Press ▲ or ▼ to set current time.

SET

PM

M12591

Note: While setting the current time, SET displays.

2.To set Day of Week, press Select again. Press ▲ or ▼ to set current day.

SET

M12593

3.Press Hold to exit programming mode.

	Pub. No. 22-5185-01
4	69-1229

Image 4

Contents Programmable Heat-Pump Thermostat Features WeekendsSET Temporary Setting the Current Day and Time Programming Your ThermostatOrganizing Your Schedule Pub. No Leave Customizing Your Weekday Schedule Customizing Your Weekend Schedule Setting the Weekday Program Press Select. Press or to set Wake temperature Press Select. Press or to set Leave temperature Setting the Weekend Program M17318 M17321 Temporary Temperature Hold Return to ., Setting the WeekSystem Setting Indefinite Temperature HoldSystem and Fan Fan Setting Emergency Heat Auxiliary HeatMinimum Off-Timing Troubleshooting Guide Symptom Possible Cause ActionTroubleshooting Contiuned Symptom Possible Cause Action Troubleshooting Contiuned Symptom Possible Cause Action Limited Warranty Low Voltage Room ThermostatsCustomer Assistance Pub. No Pub. No Troup Highway