Step #1 | Preparation |
|
|
72
72
Proper installation of the thermostat will be accomplished by following these step
by step instructions. If you are unsure about any of these steps, call a qualified technician for assistance.
These tools will be required:
Flat Blade | Wire cutter |
Screwdriver | & Stripper |
72
72
72
Make sure your Heater/Air Conditioner is working properly before beginning installation of the thermostat.
Carefully unpack the thermostat. Save the screws and instructions.
Turn off the power to the Heating/Air Conditioning system at the main fuse panel. Most residential systems have a separate breaker for disconnecting power to the furnace.
Page 6