Memorex MPD8853 manual Radio Operation, To Listen to the Radio

RADIO OPERATION

TO LISTEN TO THE RADIO

1	2
2	3	2
1		1

Set the VOLUME control 1 to minimum and plug the headphones into the PHONES jack. Press the PLAY/PAUSE (®p)/POWER ON button 2 to turn the unit on.

Slide the FUNCTION switch 1 to the RADIO position. Press the MENU/ESP/BAND button 2 to select a band (AM or FM). If listening to FM, press the MODE/￿ button 3 to select Stereo or Mono.

3
1	2

4

3

1

2

Press and release the Skip/TUNING DN o 1 or UP n 2 button to tune a station. Press and hold the Skip/TUNING DN o 1 or UP n 2 button for rapid search tuning.

5

To turn the radio off, press the STOP (■)/POWER OFF button.

Adjust the VOLUME control 1 and DBBS switch 2 as desired. If FM STEREO reception is weak/noisy, press the MODE/￿ button 3 to Mono, in this case the reception will be monaural.

ANTENNAS

AM–This unit has a built-in ferrite bar antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception.

FM–The headphones act as an antenna for FM. Extend the headphone wire for best FM reception.

AUTO SCAN

Press and hold the Skip/TUNING DN o or UP n button for approximately 1 second and the unit will automatically search for the next available station.

6