Niles Audio RS5 manual Speaker wire preparation, Speaker Phase

Page 12

INSTALLATION

4.Connect one stripped end of the speaker cable coming from the amplifier to the RS5 connection cable’s red wire. To connect the two wires, twist the stripped ends of the wire together and screw down the wire nut on the twisted wires. The material inside the wire nut will protect the stripped ends of the wire. However, if added protection is desired, place a large amount of silicon sealant so the bottom of the wire nut is encased and sealed. Pay attention to the markings on the speaker cable. Each loudspeaker you connect must be connected to the amplifier’s speaker wire in the same way.

5.Repeat step 4 with the RS5 connection cable’s black wire and the other stripped amplifier speaker cable’s conductor.

6.Connect the opposite end of the speaker cable to the amplifier or receiver. Start by performing step 1 and 2 on the speaker cable near the amplifier. Paying attention to the markings on the speaker cable conductor, attach the same conductor you attached to the red loudspeaker wire to the positive (red) or (+) amplifier output terminal. Attach the other conductor to the amplifier’s negative (black) or (–) amplifier output terminal.

Figure 6 Speaker wire preparation

Speaker Phase

Speaker wire has two conductors. One conductor is attached to the negative (black) or (-) terminals and one conductor is attached to the positive (red) or (+) terminals of both the loudspeaker and the amplifier. Usually, the wire is marked for your convenience. There are different ways to mark the conductor; a stripe on one wire, a ribbed area on one conductor that you can feel, different color metal conductor wire inside the insulation, the insulation covering the conductor might be different colors, or there might be a fabric string wound onto one of the conductors. Of course some cables make it difficult to determine which conductor is which. Be careful to avoid mistakes. If you do, one loudspeaker will be playing out of “phase” with the other loudspeaker. An out of phase pair of speakers work against each other and the sound of the two speakers playing together will be lacking in bass response and have a “phasey”sound quality. If you suspect the sound is not right, check to make sure that the conductors on each loudspeaker are attached the same on the loudspeaker and the amplifier. If you cannot see any markings or determine if they are all attached the same, try this simple test:

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RS5 Table of Contents CongratulationsIntroduction Features & Benefits Connection Cable with Water Resistant Wire Nuts Precision CrossoverConeForward Design Rigid Acoustically Inert Cabinet ConstructionInstallation Considerations Tools and Materials RequiredSelecting the number and location for your speakers Stereo Coverage 6 speakers Mono Coverage 4 speakers Choosing the Speaker CableOne Zone Volume Control Wiring Incorporating a Volume ControlTwo Zone Volume Control Wiring Recommended Amplifier PowerInstallation Connecting the loudspeakerRun the speaker cable Speaker wire preparation Speaker PhaseVerify System Operation and Loudspeaker Coverage Installing the Security Bracket and Cable Looping ThroughInstallation Upgraded Security Attachment Method Optional To install an upgraded security systemFinal Adjustments Listening at Higher Volumes CleaningOperation Specifications Nominal ImpedancePage Detach Here Warranty Registration Card Product?Year Limited Warranty Niles Audio CorporationNiles Audio Corporation

RS5 specifications

The Niles Audio RS5 is a sophisticated in-wall speaker designed to deliver exceptional audio performance for both music and home theater applications. Renowned for its innovative engineering and versatility, the RS5 features several key technologies and characteristics that set it apart in the realm of architectural speakers.

One of the standout attributes of the Niles RS5 is its 5.25-inch polypropylene woofer. This component is crafted to provide deep bass response and clear midrange frequencies, resulting in a rich and immersive sound experience. The woofer is teamed up with a 1-inch silk dome tweeter, which ensures smooth high-frequency reproduction and wide dispersion. This combination allows the RS5 to excel in both music listening and cinematic experiences, making it a favorite among audio enthusiasts who appreciate balanced sound.

To enhance its acoustic performance, the RS5 incorporates Niles’ proprietary technologies, including the exclusive Dynamic Balance design. This innovative approach minimizes distortion and optimizes frequency response across the audio spectrum, ensuring that listeners enjoy an accurate and natural sound. Additionally, the RS5 is designed with a frequency response range of 70 Hz to 20 kHz, further showcasing its capability to reproduce a wide variety of audio content effectively.

Installation flexibility is another hallmark of the Niles RS5. It features a low-profile grill that can be painted to match any wall or ceiling color, allowing it to seamlessly blend into any room decor. The mounting system is user-friendly, accommodating various wall types and reducing installation time. This speaker is ideal for those who seek high-quality audio without compromising their interior design.

For home entertainment systems, the Niles RS5 can be used as a standalone speaker or part of a larger configuration. Its compatibility with surround sound systems allows it to deliver a cohesive audio experience when paired with other Niles speakers or subwoofers. This adaptability enhances its appeal for diverse audio setups, catering to both casual listeners and dedicated audiophiles.

In conclusion, the Niles Audio RS5 stands out in the competitive in-wall speaker market due to its impressive audio performance, innovative technologies, and flexible installation options. Whether for a home theater or a multi-room audio setup, the RS5 promises to deliver high-quality sound without sacrificing aesthetic value, making it an ideal choice for discerning audio lovers.
Top Page Image Contents