Aube Technologies TH123 Wire Labelling, Choosing a Location, Display in C or F, Wiring Diagram

Page 2

WARNING: After removing the wall plate, if you find that it is mounted on a junction box (e.g. a box similar to one behind a light switch or electric outlet), 240 volts circuit may be present and there is a danger of electric shock. Please consult a qualified electrician.

WIRE LABELLING

nIf your old thermostat wall plate has more than two wires con- nected to it, then you will need to label the wires. First look for LETTER near each terminal where a wire is connected. These terminals and markings may be on either side of the wall plate.

oDisconnect and identify each wire.

pYou may wish to tape the wires to the wall to keep them from slipping through the hole in the wall. If the hole in the wall is larger than necessary, fill it in order to prevent hot or cold air to penetrate the thermostat. In this manner, the thermostat will behave perfectly.

CHOOSING A LOCATION

Note: For a new installation, choose a mounting location about five feet (150 cm) above the floor in an area with good air circulation and away from:

Drafts or dead air spots, Air ducts, radiant heat from the sun or appliances, Concealed pipes and chimneys.

Mounting the thermostat onto the wall

nRemove completely the slide door of the thermostat. o Unscrew and remove the cover over the connector.

pMark the holes posi- tion and align the wire

coming from the wall in the hole beside the connectors.

q Drill two holes and insert the plastic anchors carefully into the holes until they are flush with the wall.

rFasten securely the thermostat to the wall with the two (2) screws.

DISPLAY IN °C OR °F

After the installation of the battery, if you want to change unit of the degree displayed, follow these instructions (see the illustration):

n From the back of the thermostat, unscrew the cover.

o For the °C display, the jumper in JP1 is installed.

pFor the °F display, the jumper in JP1 is removed. q Re-install the cover in place.

r Press on the reset button.

CONNECTING THE LABELLED WIRES TO THE THERMO- STAT

nConnect the system wires to the terminals according to the wir- ing diagram shown in the section “wiring diagram”.

WARNING: Do not remove the jumper between terminals Rh and Rc unless otherwise specified.

oPush on the wires in the wall and replace the cover over the connectors.

pInstall two (2) “AA” size batteries into the battery compartment.

qTurn on the main switch of the system. The thermostat is ready for use.

WIRING DIAGRAM

The TH123 thermostat can be used with any single stage heating and cooling system. You cannot directly use this thermostat on mul- tiple stages heating or cooling system, millivolt system, heat pump or 240 VAC control system. It can control some of those systems by installing an isolation relay and a 24-volt transformer.

HEATING SYSTEM TYPE

The heating system type selector is located below the wire connec- tor. Start first by keeping the selector at default position Hg. If the fan switch is at FAN AUTO position and the fan doesn’t start when the thermostat turns on the furnace, place the type selector at posi- tion He.

2-WIRE HEATING SYSTEM

nConnect the heating relay to terminal W.

oConnect the 24 VAC transformer to terminal Rh.

3-WIRE HEATING SYSTEM WITH FAN CONTROL

nConnect the heating relay to terminal W. o Connect the fan relay to terminal G.

p Connect the 24 VAC transformer to terminal Rh.

4-WIRE HEATING AND COOLING SYSTEM

nConnect the heating relay to terminal W. o Connect the cooling relay to terminal Y. p Connect the fan relay to terminal G.

q Connect the 24VAC transformer to terminal Rh.

Image 2
Contents Introduction InstallationSummary Wiring Diagram Wire LabellingConnecting the Labelled Wires to the THERMO- Stat Wire Heating SystemOperating Modes Characteristics Programming

TH123 specifications

Aube Technologies has made significant strides in the home automation sector, and one of its standout products is the TH123 thermostat. This advanced device is tailored for homeowners seeking an efficient way to manage their heating and cooling systems while ensuring optimal comfort.

One of the main features of the Aube Technologies TH123 is its intuitive programmable functionality. Users can easily set up heating or cooling schedules according to their lifestyle, which not only enhances comfort but also promotes energy savings. With the ability to create specific programs for weekdays and weekends, the TH123 accommodates various schedules, ensuring that temperatures are adjusted automatically throughout the day without requiring constant manual intervention.

Another notable characteristic of the TH123 is its compatibility with a wide range of heating systems. Whether it's electric baseboard heaters, hydronic systems, or forced air systems, the thermostat is designed to integrate seamlessly, making it a versatile choice for many home setups. Furthermore, the TH123 supports both single-stage and multi-stage heating and cooling systems, further enhancing its adaptability.

Technology-wise, the TH123 is equipped with an advanced temperature sensor that ensures precise temperature readings and control. This accuracy means that users can trust the thermostat to maintain their desired comfort levels without constant fluctuations. Additionally, the TH123 has a self-learning feature that enables it to adapt to the homeowner’s preferences over time, optimizing the heating and cooling cycles to match their routine more closely.

The user interface of the TH123 is another highlight. Featuring a large, easy-to-read display, users can effortlessly navigate through settings and options. The backlit screen ensures visibility, even in low-light conditions, enhancing usability.

Energy efficiency is a core focus for the Aube Technologies TH123. By allowing for customized scheduling and providing smart temperature control, the thermostat contributes to reduced energy consumption, which is both environmentally friendly and cost-effective.

Overall, the Aube Technologies TH123 stands out in the crowded thermostat market by combining user-friendly features, advanced technology, and broad compatibility with various heating systems. It not only improves comfort but is also an excellent investment for energy-conscious homeowners looking to streamline their climate control solutions.