Aube Technologies TH110 manual Description, Configuration, Power-up, Connection

nDescription

Aube’s TH110 programmable thermostat can be connected to an electric heating system such as an electric baseboard, a radiant ceiling, a floor heat- ing system, an electric convector, etc. It is not compatible with a central heat- ing system.

TH110

User Guide

Programmable Thermostat

pConfiguration

The configuration switches are on the back of the thermostat. Default (factory) settings are inside the gray cells.

#	Configurations	UP	DN
SW1	Not used
SW2	Early Start a	Disable	Enable
SW3	Time format	12-hour	24-hour
SW4	Temperature format b	°F	°C

On/Standby switch

Operating mode icons

Heating indicator

Periods

Temperature preset buttons

Temperature adjustment

Time and day

Appears during the

setpoint display

Temperature

Preset temperature

icons

To set the day

To set the time

To program the schedule

To skip a period

To select the operating mode

a.Early Start can be used in Automatic mode only. When this function is enabled, the thermostat calculates the optimal time to start heating in order to obtain the desired temperature by the set time. The thermostat re-assesses the start time daily based on the previous day’s perfor- mance.

b.If you change the temperature display format, the preset temperatures (, and ) will return to their default settings.

qPower-up

Upon power-up, the thermostat is in manual mode ( ) and displays the actual temperature.

nPress the Hour and Min buttons to set the thermostat’s clock.

oPress the Day button to set the day.

*Set the switch to Standby to cut power to the heater. This will not affect the time and temperature settings.

oConnection

TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRICAL SHOCK.

•The installation must be carried out by an electrician.

•All cables and connections must conform to the local electrical code.

•Special CO/ALR solderless connectors must be used when connecting with aluminum conductors.

•Install the thermostat onto an electrical box.

•Install the thermostat about 5 feet high, on an inside wall facing the heater.

•Avoid locations where there are air drafts (such as the top of a staircase or an air outlet), dead air spots (such as behind a door), or direct sun- light.

•Do not install the thermostat on a wall that conceals chimney or stove pipes.

rTemperature Setting

Setpoint

The thermostat normally displays the actual temperature. To view the set- point, press the or button briefly. The setpoint will appear for the next 5 seconds.

To change the setpoint, press the or button until the desired temperature is displayed. To scroll faster, hold the button.

Using a preset temperature

The thermostat has 3 preset temperatures:

Comfort temperature

Economy temperature

Vacation temperature

Icon	Intended use	Default setting
	Comfort (when at home)	21°C (70°F)
	Economy (when asleep or away from home)	16°C (62°F)
	Vacation (during prolonged absence)	10°C (50°F)

nConnect the thermostat wires to the 240 V line and to the load using sold- erless connectors for copper wires.

oPush the excess wire back into the electrical box to prevent interference with the thermostat.

pSecure the thermostat using two 6-32 screws.

qReturn power to heating system.

NOTE: Always keep the thermostat's vents clean and unobstructed.

	Power
	B	R
240 VAC B
	B
	R
60 HZ	R
	R
	B
	Load

•To use the Comfort or Economy temperature, press the or button respectively. The corresponding icon will be displayed.

•To use the Vacation temperature, press both and buttons simulta- neously. The icon will be displayed.

Storing a preset temperature

To store the Comfort or Economy temperature:

Set the desired temperature using the or button. Press and hold

the appropriate button ( or ) for approximately 3 seconds until the corresponding icon is displayed. Press the Mode button.

To store the Vacation temperature:

Set the desired temperature using the or button. Press and hold

both and buttons simultaneously for approximately 3 seconds until the icon is displayed. Press the Mode button.

TH110 400-110-000-A 2/6/05 1/2