Installing the Speaker, Frame See Figure

Installation of the Speaker and Grille for New or Existing Construction

Installing the Speaker

5. Place the speaker baffle

If the grille is already

in the frame by inserting

installed, remove it by

the tabs at the base of the

using a bent paper clip or

speaker baffle into the

the tip of a corkscrew and

corresponding holes in

pulling it away from the

the frame and pushing

frame (See Figure 13).

the speaker forward until

Figure 13

the snaps engage (See

1. Separate the speaker wire so

Figure 16).

that at least two inches of each

conductor are free.

2. Open the no-strip terminal by applying

pressure to the red and black levers until

an audible “click” is heard.

3. Insert one unstripped wire fully into the

black and one into the red terminal. Pay

attention to the markings on the wire.

Each speaker must be connected to the

amplifier in the same way. If unsure,

see section “Speaker Phase” located on

the following page. Squeeze the red

Figure 15

and black levers until they click signify-

ing that they have locked into the wire.

6. IMPORTANT: When installing the

Check to make sure that the knife

speakers in the ceiling, or if the instal-

assembly inside the no strip connector

lation is in an earthquake zone, it is

has properly pierced the wire (See

recommended that you utilize the

Figure 14).

enclosed sheet metal screws to secure

the baffle to the frame.

a. Locate the dimples on the front baffle.

b. Place the self-tapping sheet metal

screw in the dimple and turn it with a

screw driver until it cuts through the

baffle and anchors securely in the

frame (See Figure 17).

Figure 14

4.Insert the no strip terminal into the cor- responding socket on the rear of the speaker. Push it down until it locks in place. The terminal will only fit in the socket in one direction. If the terminal does not properly seat, reverse the termi- nal 180˚ and reinsert (See Figure 15).

SEN

Figure 16

PR5, PR6 specifications

Niles Audio PR6 is a high-performance in-ceiling speaker designed to deliver exceptional sound quality and seamless integration into home audio systems. Known for its innovative technologies and robust build, the PR6 stands out as a premium choice for audiophiles and casual listeners alike.

One of the key features of the Niles Audio PR6 is its 6.5-inch polypropylene woofer, which is engineered to provide deep, rich bass response. This design allows for clear and powerful sound reproduction across a wide frequency range. Complementing the woofer is a 1-inch tweeter that utilizes a pivoting design, enabling users to direct sound where it is most needed. This feature is particularly beneficial in multi-room audio setups or home theaters where sound dispersion is critical for an immersive experience.

The PR6 incorporates Niles' proprietary Energy Star-rated amplifier technology, which not only enhances audio performance but also helps in energy efficiency. This is an essential feature for eco-conscious consumers who wish to minimize their carbon footprint without sacrificing sound quality.

In terms of installation, the Niles Audio PR6 showcases an easy-to-mount design with a built-in mounting bracket. This feature simplifies the installation process, making it accessible for both professional installers and DIY enthusiasts. The speaker's low profile and sleek grille design allow it to blend seamlessly with a variety of interior decors, ensuring that it enhances rather than detracts from any room's aesthetic.

For those concerned about durability, the Niles Audio PR6 is built with high-quality materials that withstand the test of time. Its weather-resistant features make it suitable for both indoor and outdoor use, allowing homeowners to enjoy their favorite music in any setting.

Moreover, the speaker's compatibility with a wide range of receivers ensures that it can be easily integrated into existing audio systems. This flexibility makes the PR6 an ideal option for both new installations and upgrades to existing systems.

In conclusion, the Niles Audio PR6 is a sophisticated in-ceiling speaker that excels in sound quality, design, and versatility. Its combination of advanced technologies, durability, and aesthetic appeal makes it a standout option for anyone looking to enhance their auditory experience in their home environment. Whether for music or movies, the PR6 promises to deliver exceptional sound quality that will satisfy even the most discerning listeners.