Aprilaire 8553 owner manual 110-790B 7/11/01 311 PM

Page 8

110-790B 7/11/01 3:11 PM Page 8

To activate the progressive recovery mode simultaneously press the PROGRAM and FAN buttons. A small

thermostat icon, “ “, will appear under the clock. Once in this mode proceed with programming your thermostat remembering to use exact times for each event time change.

NOTE: If not using Progressive Recovery, it will take some time for your heating or cooling system to reach the desired temperature when returning from a setback. Therefore, it is suggested you set your program time before the actual time you want your home to reach the desired temperature. For example, if you get up at 7:00 AM and have a 6 degree setback, set your Morning event at 6:00 AM to be sure the desired temperature is reached by 7:00 AM.

NOTE: This thermostat can be programmed with either 2 events per day (day and night) or 4 events per day (morning, day, evening, and night). Before programming the thermostat, decide which setting is best for your personal schedule. The thermostat is factory preset for 4 events per day. To change to two events per day, refer to page 20 “Optional Settings for Additional Thermostat Features,” or contact your contractor for assistance.

– 6 –

Image 8
Contents Model Equipment Control Temperature ControlCooling Energy Star Program Information Heat = 70˚ Cool = 78˚Heat = 62˚ Cool = 85˚ Setting Or Changing The Clock Change the flashing symbol to the current day Week110-790B 7/11/01 311 PM Setting Or Changing The Program Progressive Recovery110-790B 7/11/01 311 PM Program Schedule Heat = Cool =Setting Or Changing Program Times Press and release the program button. The Day NightSetting Or Changing Heating Temperatures Setting Or Changing Cooling Temperatures Night eventsPress and release the Mode button until the word Repeat steps 2 and 3 for the Day Evening , and Night eventsReviewing Programmed Time Schedules Temperature Settings To Start Running The ProgramFor Best Performance Thermostat OperationAprilaire Model Day Programmable Thermostat Temperature Control Return to the programTime Control Equipment Control Time during sub-freezing temperatures Optional Settings For Additional Thermostat Features Automatically returns to the original program Installing contractor Following procedure must beFigure 1 carefully followed See Figure Place the cover On the base by lining up Turn the thermostat power back on Case Of Power Failure Cleaning Limited Warranty BOX 1467 MADISON, WI