Niles Audio CORAL RS8SI, SANDSTONE RS8SI, GRANITE RS8SI Speaker Phase, One-speaker stereo mode

Page 14

INSTALLATION

3.Connect one stripped end of the speaker cable coming from the amplifier to the RS8Si connection cable’s red wire of one cable and the RS8Si connection cable’s yellow wire. To connect the three wires, twist the stripped ends of the wire together and screw down the wire nut on the twisted wires. The material inside the wire nut will protect the stripped ends of the wire. However, if added protection is desired, place a large amount of silicon sealant so the bottom of the wire nut is encased and sealed. Pay attention to the markings on the speaker cable. Each loudspeaker you connect must be connected to the amplifier’s speaker wire in the same way.

4.Repeat step 3 with the RS8Si connection cable’s black wires and the other stripped amplifier speaker cable’s conductor.

5.Connect the opposite end of the speaker cable to the amplifier or receiver. Start by performing step 1 and 2 on the speaker cable near the amplifier. Paying attention to the markings on the speaker cable conductor, attach the same conductor you attached to the red loudspeaker wire to the positive (red) or (+) amplifier output terminal. Attach the other conductor to the amplifier’s negative (black) or (–) amplifier output terminal.

Speaker Phase

Speaker wire has two conductors. One conductor is attached to the negative (black) or (-) terminals and one conductor is attached to the positive (red) or (+) terminals of both the loudspeaker and the amplifier. Usually, the wire is marked for your convenience. There are different ways to mark the conductor; a stripe on one wire, a ribbed area on one conductor that you can feel, different color metal conductor wire inside the insulation, the insulation covering the conductor might be different colors, or there might be a fabric string wound onto one of the conductors. Of course some cables make it difficult to determine which conductor is which. Be careful to avoid mistakes. If you do, one loudspeaker will be playing out of “phase” with the other loudspeaker. An out of phase pair of speakers work against each other and the sound of the two speakers playing together will be lacking in bass response and have a “phasey” sound quality. If you suspect the sound is not right, check to make sure that the conductors on each loudspeaker are attached the same on the loudspeaker and the amplifier. If you cannot see any markings or determine if they are all attached the same, try this simple test:

In one-speaker stereo mode

1.Play some music with the amplifier or receiver set to Mono.

2.Stand in the middle of each speaker and three feet away from it. Listen to the richness of the bass and the loudness of the sound.

3.Turn off the amplifier and reverse the connections on one side of the speaker only.

4.Repeat the listening test with the same setting of the volume controls. If the current sound has a richer bass and is slightly louder than the previous sound, the speakers

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents RS8Si Table of Contents Introduction Features & Benefits ConeForward Design Dual Connection Cables with Water Resistant Wire NutsDual Precision Crossovers Rigid Acoustically Inert Cabinet ConstructionTools and Materials Required Installation ConsiderationsSingle Speaker Stereo Mode Selecting the number and location for your speakersTwo-speaker Stereo Mode Two-speaker Stereo Coverage with 4 speakers One-speaker Stereo Mode vs. Two-speaker Stereo Mode Choosing the Speaker CableIncorporating a Volume Control One-Speaker StereoTwo-Speaker Stereo Two Zone VC Wiring Recommended Amplifier PowerRun the speaker cable InstallationConnecting the loudspeaker in one-speaker stereo mode Connecting the loudspeaker in two-speaker stereo mode Speaker wire preparationSpeaker Phase One-speaker stereo modeTwo-speaker stereo mode or checking phase between speakers Verify System Operation and Loudspeaker CoverageInstalling the Security Bracket and Cable Bottom of LoudspeakerUpgraded Security Attachment Method Optional To install an upgraded security systemUpgraded Security Attachment Final AdjustmentsOperation Listening at Higher VolumesCleaning Specifications Detach Here Warranty Registration Card Age Musical tastesYear Limited Warranty Niles Audio CorporationNiles Audio Corporation

CORAL RS8SI, GRANITE RS8SI, SANDSTONE RS8SI specifications

Niles Audio has long been a trusted name in the realm of outdoor and landscape speakers, and their latest offerings, the SANDSTONE RS8SI, GRANITE RS8SI, and CORAL RS8SI, continue to embody this legacy. Designed with both aesthetics and acoustics in mind, these speakers provide exceptional sound quality while seamlessly blending into their natural surroundings.

The SANDSTONE RS8SI features a unique sandstone texture that mimics natural rock, making it an excellent choice for gardens or patios. With an 8-inch polypropylene woofer and a 1-inch dome tweeter, this model delivers clear, powerful sound across a wide frequency range. Its frequency response spans from 40 Hz to 20 kHz, ensuring that both deep bass and high treble notes are reproduced accurately.

Similarly, the GRANITE RS8SI offers a robust granite-like finish that withstands the elements while providing high-quality audio performance. This model is also equipped with an 8-inch woofer and a 1-inch tweeter, ensuring it can fill outdoor spaces with rich sound. Its weather-resistant design and durable construction make it perfect for any outdoor setting, whether by the pool or in the backyard.

On the other hand, the CORAL RS8SI stands out with its coral stone aesthetic. This speaker features the same powerful woofer and tweeter combination, delivering a remarkable listening experience. All three models are equipped with advanced technologies such as high-efficiency drivers and wide dispersion, allowing for a more immersive sound experience without the need for multiple speakers.

One of the key characteristics of the Niles Audio outdoor speakers is their ability to blend into the environment effortlessly. With a selection of finishes that emulate natural stone, these speakers not only sound fantastic but also enhance the overall aesthetic of outdoor spaces. Furthermore, each speaker is designed for easy installation and can be used in a variety of configurations to suit any landscape.

In summary, the Niles Audio SANDSTONE RS8SI, GRANITE RS8SI, and CORAL RS8SI offer a perfect combination of beauty and performance. With their robust construction, high-quality sound, and nature-inspired designs, these outdoor speakers are ideal for anyone looking to enjoy their favorite music in an outdoor setting. Investing in these speakers is a step towards creating an unmatched auditory experience that can be cherished in any garden, patio, or backyard.
Top Page Image Contents