Remote temperature sensor optional | Aprilaire 8600 specs

Installation

Remote temperature sensor (optional)

A remote temperature sensor can be used if the thermostat has to be mounted in a concealed location. A 8051 flush mount or 8053 surface mount remote temperature sensor can be attached to the T1 and T2 terminals and mounted in a recommended area.. The remote sensor must be enabled in the installer setup menu.. When the remote sensor is installed it overrides the internal sensor.

Remote temperature sensor should be mounted:

•On an interior wall, in a frequently occupied space.

•Approximately 5‘ above floor.

•At least 18” from outside wall.

•Using less than 300’ of wire.

Do not mount remote sensor:

•Behind doors, in corners or other dead air spaces.

•In direct sunlight, near lighting fixtures, or other appliances that give off heat.

•On an outside or unconditioned area wall.

•In the flow of a supply register, in stairwells, or near outside doors..

•On a wall with concealed pipes or ductwork.

•Near 120 VAC lines.

C B O Y Y2 G RC R W2 W L S2 S1 T1 T2

Thermostat mounting

1. Remove the rear mounting plate from the thermostat.

2..Pull wires through the opening on the back of the thermostat..

3.Position and level the mounting plate of the thermostat on wall and mark the hole locations with a pencil..

4.Drill 1/4” holes and insert supplied anchors

(drywall only)..

5.Place mounting plate over anchors, insert and tighten screws..

6.Seal wire entry holes to prevent drafts affecting temperature readings..

Power & Reset options

The thermostat is dual power. It can either be AC or battery powered, or both (to provide backup power for the clock). Batteries are optional if your thermostat was wired to run on AC power when installed.

For heat pump systems the C terminal must be connected to the common of the 24VAC transformer in order for the system fault and emergency heat indicators to operate..

The thermostat has a memory backup that saves the thermostat settings in case of a power interruption. The system settings will be retained but the clock will reset after 90 seconds with no battery or AC power.

The reset button located under the battery cover can be used to reset the thermostat to factory defaults. The system settings will also be reset to default..

61000729A 8600 Tstat Install.indd 3

10/8/10 10:32:31 AM

8600 specifications

The Aprilaire 8600 is a state-of-the-art smart thermostat designed to enhance indoor comfort while improving energy efficiency. As a product of Aprilaire, a leading name in indoor air quality solutions, the 8600 offers a plethora of features that can drastically improve home climate management.

One of the standout features of the Aprilaire 8600 is its user-friendly interface. The large, color touchscreen display is not only aesthetically pleasing but also intuitive, making it easy for users to navigate through settings. The thermostat supports customizable programming, enabling homeowners to set specific temperature schedules based on their lifestyle. This means you can lower heating or cooling during the day when the house is empty and warm it up just before you return home, maximizing energy savings.

Equipped with advanced technologies, the Aprilaire 8600 also incorporates Wi-Fi connectivity, allowing users to control their home’s climate remotely via a smartphone app. The ability to adjust settings from anywhere means you'll never have to return to a cold house again. Additionally, the thermostat features smart learning capabilities, gradually adapting to your heating and cooling habits for optimal comfort.

Another key characteristic of the Aprilaire 8600 is its advanced humidity control. Unlike standard thermostats, this model effectively manages humidity levels, helping to maintain a comfortable environment while preventing issues like mold growth and condensation. This feature is especially beneficial in regions with high humidity or during damp seasons.

The 8600 also includes an energy management system that provides real-time feedback on energy usage. This helps homeowners understand their energy consumption better and make informed decisions to cut down on waste. Moreover, the built-in alerts notify users of any maintenance needs, ensuring the HVAC system operates at peak efficiency throughout its lifecycle.

In conclusion, the Aprilaire 8600 is a powerful blend of advanced technology and user-oriented design. With features such as a high-resolution touchscreen, Wi-Fi connectivity, and exceptional humidity control, it stands out as a leader in smart thermostat technology. By integrating these functionalities, the Aprilaire 8600 not only boosts comfort but also promotes energy conservation, making it an invaluable tool for any modern home. Whether you prioritize comfort, efficiency, or smart home integration, the Aprilaire 8600 delivers on all fronts.