Elk specifications Address and Enrollment, ELK-M1KPAS

Page 3

Address and Enrollment

Keypads and expander devices that operate on the RS-485 4-wire data bus must each have a unique address setting from 1 to 16 within their device TYPE. Keypads are device TYPE 1, input (zone) expanders are TYPE 2, output expanders are TYPE 3, etc. The purpose of device types is so that the address numbers can be re-used in each different device type. It is OK to have a Keypad, a Zone Expander, and a Output Expander all set to address 2 on the same data bus since each device is a different device type. It is NOT OK to have duplications of addresses within the same device type. I.E. Multiple keypads on a control cannot be set to 'like' addresses.

The M1KPAS is factory preset to address 16. Valid addresses are 1 to 16. Whenever an M1 control is powered up for the first time only the first keypad (address 1) is automatically enrolled. Any additional keypads must be manually enrolled from “Menu 1 - Bus Module Enrollment”. Before enrolling each device will need to be set with an address.

Setting the Address of an M1KPAS Arming Station:

1.Press and hold the " * " key for 10 seconds. This will place the M1KPAS arming station into setup (bootloader) mode which is indicated by the numeric keys blinking On and Off together. NOTE: Another way to access the setup mode is to remove power by unplugging the data bus cable and applying power while holding any key pressed.

2.Once the unit is in setup mode press the "F" key followed immediately by the "1" key. The unit will now display its current address setting utilizing the Ready (Green), Trouble (Yellow), Armed (Red) LEDs and the EXIT and STAY keys. Each LED or key has an assigned binary value. See table below. The EXIT key (value of 16) will be lighted by itself when the M1KPAS is fresh from the factory.

3.Enter the desired new address number from 1 to 16 and press the EXIT key. OR Press the EXIT key by itself to exit without changing the address.

4.To exit completely from the setup mode press the EXIT key again. The numeric keys will stop blinking On and OFF.

5.The Ready, Trouble, Armed, Exit, and Stay keys will all begin lighting in a clockwise process to indicate that the keypad has not been enrolled with the control. Proceed to the ENROLLING process to make the keypad operational.

 

When the M1KAS is in setup mode the LEDs will display the

 

 

Keypad

 

address setting in Binary Representation

 

 

 

Address

Armed

Trouble

Ready

Stay (Blue)

Exit (Blue)

 

 

 

 

 

 

(Red) = 1

(Yellow) = 2

(Red) = 4

= 8

= 16

EXAMPLE

 

1

On

-

-

-

-

 

2

-

On

-

-

-

 

Address 3

3

On

On

-

-

-

ELK-M1KPAS

would be

4

-

-

On

-

-

 

indicated by

5

On

-

On

-

-

 

these 2 LEDs

 

being ON

6

-

On

On

-

-

Ready Trouble Armed

 

 

 

 

 

 

 

 

7

On

On

On

-

-

 

 

8

-

-

-

On

-

 

 

9

On

-

-

On

-

 

 

10

-

On

-

On

-

 

 

11

On

On

-

On

-

 

 

12

-

-

On

On

-

 

 

13

On

-

On

On

-

 

 

14

-

On

On

On

-

 

 

15

On

On

On

On

-

 

 

16

-

-

-

-

On

 

 

Enrolling the M1KPAS Arming Station: (This step requires an LCD Keypad or the ElkRP software)

1.Press the ELK key, then press 9 (or scroll up) to display 9 - Installation Programming. Press the RIGHT arrow key to select this menu. The Installer Program Code (PIN) must be entered to access this menu.

2.Enter the Installer Program Code. (See M1 Manual for the default Code)

3.The first Installer Programming menu displayed will be "Bus Module Enrollment"

4.Press the RIGHT arrow key to select this menu. "Enrolling Bus Modules" will display

5.The M1 will transmit an enrollment message to all data bus devices, following by a display showing the total Bus Modules that are enrolled. To view the enrolled devices and/or remove a device press the RIGHT arrow key to select Edit mode.

6.Press the * or Exit keys to exit Installer Programming.

Auth.Required Enter Valid Pin

01-Bus Module Enrollment

XXBus Modules Enrolled,Editr

Page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Features SpecificationsApplication Installation of ELK-M1KPAS Keypad Arming Station ELK-M1KPAS Address and EnrollmentSymptom Potential Cause Remedy Things to try Troubleshooting and DiagnosticsUsing the Quick Arm Arming in the Away ModeArming in the Vacation Mode Arming in the Stay ModeArming Station Operation Guide

M1KPAS specifications

The Elk M1KPAS is a highly regarded security system designed for residential and commercial applications. It stands out for its advanced features, user-friendly interface, and robust technology. This comprehensive system provides extensive security solutions, making it an ideal choice for those seeking reliable protection.

One of the key features of the Elk M1KPAS is its versatility. The system supports a wide range of configurations, accommodating various sensor types and alarm devices. It works seamlessly with both wired and wireless sensors, allowing users to customize their security setup according to their specific needs. This flexibility makes the M1KPAS suitable for buildings of all sizes, from small homes to large office complexes.

The M1KPAS is equipped with advanced communication technologies, enabling users to monitor and control their security system from anywhere. With built-in Ethernet connectivity and optional cellular modules, the system allows for remote access through smartphone apps and web interfaces. This means users can receive alerts, check system status, and control features even when they are away from their property.

Another significant characteristic of the Elk M1KPAS is its integration capabilities. The system can be easily integrated with various home automation devices, such as lighting, climate control, and surveillance cameras. This synergy provides users with a comprehensive smart home experience, allowing them to manage their security along with other home systems through a single interface.

The Elk M1KPAS also emphasizes user accessibility. The system comes with a user-friendly keypad that provides straightforward navigation for arming, disarming, and configuring user settings. Additionally, it includes voice prompts to guide users through programming, ensuring that even those with limited technical knowledge can operate the system effectively.

Moreover, the M1KPAS is designed with scalability in mind. As security needs evolve, users can expand their system easily by adding more devices or sensors. This capability ensures that the system can grow alongside the user’s requirements without necessitating a complete overhaul.

In summary, the Elk M1KPAS is a versatile and technologically advanced security system that offers a wealth of features and integration capabilities. With its user-friendly interface, remote access options, and scalability, it provides a comprehensive solution for maintaining safety and security. Whether for home or business use, the M1KPAS stands out as an excellent choice for those serious about protecting their property.
Top Page Image Contents