Niles Audio 15SW manual Controls and Connectors, Operation Controls

CONTROLS AND CONNECTORS

OPERATION CONTROLS

The Pro15SW’s operation controls are located on the unit’s front panel, as shown in Figure 3. They function as follows:

,%6%,

			3%4%50
			-53)#
			-/6)%
			
-/6)%		-53)#

2	3	4	5
,/7 0!33	0(!3%	()'( 0!33
(Z	Ž	(Z	0/
(ZZ (Z	ŽŽ Ž	(Z (Z	0''
'3&26&/$:		'3&26&/$:

1

Figure 3. The Pro15SW’s front panel contains the subwoofer’s operation controls.

1.MUSIC/MOVIE LEVEL and SETUP Controls: While listening to music, move SETUP switch to MUSIC and adjust the MUSIC LEVEL control to set the desired bass level. Similarly, while listening to a movie, move SETUP to MOVIE and adjust the MOVIE LEVEL control to set the desired bass level. Each level control includes an accompanying LED indicator to identify which one is currently active as triggered by your home theater sound processor or receiver (see Figure 3 on page 7). Also see SETTING UP THE PRO15SW on page 15.

2.LOW PASS Frequency Control: Use this control to set the subwoofer’s low-pass

crossover frequency from 40 to 120 Hz. For more details, see SETTING UP PRO15SW on page 15.

3.PHASE Control: Use this control to set the subwoofer’s phase response from 0 to 180°. See SETTING UP THE PRO15SW on page 15.

4.HIGH PASS Frequency adjustment with ON/OFF switch: Use the HIGH PASS control to set the high-pass crossover frequency from 60 to 160 Hz (according to your loudspeaker manufacturer’s recommendation) to drive a satellite loudspeaker system amplifier from the line-level AUDIO OUT jacks (also see Figure 3 on page 7.) To activate the filtered signals, set the ON/OFF switch to ON.

5.The MODE indicator (on the far right) shows which power mode is active, as set by the (Auto) POWER switch (see Figure 3 on page 7): Green is ON; Red is STANDBY.

(CONTINUED ON NEXT PAGE)

7