Niles Audio MP6, MP5 manual Installation Brackets, Frames, Construction, Stage Two Before Paint

Page 14

Installation of Brackets, Frames and Grilles in New Construction

Installation of

Brackets, Frames

and Grilles in New

Construction

Stage One: Before Drywall is Hung. Insulating the Wall Cavity.

If feasible, fill the wall cavity with insula- tion at this point.

Attach the wings to the bracket by snap- ping them into the sides of the bracket. The wings can be shortened by breaking them along the scored lines if their length will interfere with a corner or eaves. You can mount the bracket horizontally or ver- tically (See Figure 8).

Figure 8

Screw one side of the assembled bracket with wings to the stud using one of the supplied screws. Level the bracket. Screw the other side of the bracket to the stud. Two or three screws (depending upon the size of the model) on each side makes for a very secure installation. Attach the wire to the bracket at the indicated wire tie points (See Figure 9).

Stage Two: Before Paint

Screw the frame to the installed bracket using the supplied screws. Do not over- tighten the screws. This will distort the frame and the grilles will not fit (this is not permanent, just loosen the screws and the grille will pop in) (See Figure 10).

Painting the Aluminum Grilles

The grille is important to the sound of the MP loudspeakers. Do not fill the holes of

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents D E L S Table of Contents Introduction Kaladex Tweeter housed in a Precision Adjustment MechanismSnap-in Baffle Assembly Antiresonant Wave BracingAbsolutely Flush to the Wall Appearance Easy Retrofit Installation in your Existing HomeBumpBack Woofer Magnet Low Diffraction, MicroPerf Aluminum GrillesIncorporating a Local Volume Control Installation ConsiderationsRecommended Amplifier Power Insulating the Wall Cavity Speaker WireIncorporating a Remote Control Speaker Placement Placement for Critical ListeningBoundary Effect Placement for Varying Listening PositionsPlacement for Rear Home Theater Applications Speaker Placement Running the Speaker Wire in New ConstructionConcealing Speaker Wire Existing WallsLocation Building codes, some municipalities Stage Two Before Paint Installation Brackets, FramesConstruction Page Installation Brackets, Frames Grilles Existing Walls Page Installing the Speaker Frame See FigureSpeaker Phase Adjusting the Tweeter Installing the GrilleOperation Listening at Higher VolumesCleaning Removing The SpeakerSpecifications Model MP5Model MP6 Page Niles Audio Corporation R R a N T Y R E G I ST R AT I O N C a R D Limited Warranty Niles Audio CorporationNiles Audio Corporation

MP5, MP6 specifications

Niles Audio, a prominent name in audio innovation, offers the MP6 and MP5, two remarkable multi-room audio controllers that elevate the listening experience in both residential and commercial environments. Designed to seamlessly integrate with existing audio systems, these models are characterized by their sophisticated technology, intuitive user interface, and high-quality sound reproduction.

The MP6 is known for its ability to accommodate up to six zones of audio distribution, making it perfect for larger spaces. It features an intuitive digital display that allows users to navigate through selections with ease, giving them complete control over music selection and volume settings across different areas. The controller supports a variety of source inputs, including CD players, streaming devices, and even television audio, ensuring that users can enjoy their favorite content without compromise.

The MP5, while slightly smaller, doesn't compromise on functionality. It manages up to five zones with similar ease and elegance. Both models utilize advanced digital amplification technology, which ensures that audio performance is not only crystal clear but also powerful enough to fill larger spaces without distortion. This high-fidelity audio experience is complemented by the controllers' compact design, allowing for discreet installation in any environment.

One of the standout features of the Niles Audio MP6 and MP5 is their compatibility with multi-room systems. Both models support Ethernet connectivity, enabling users to integrate streaming music services, such as Spotify and Pandora, directly into their audio setup. This capability allows for a versatile listening experience, making it easy to switch between different audio sources and settings depending on the mood or occasion.

Moreover, these controllers come with a mobile app that enhances user convenience. The app is designed to control volume levels, select audio sources, and customize settings from anywhere within the home or workspace. This wireless control adds a layer of flexibility that modern users highly appreciate.

In conclusion, the Niles Audio MP6 and MP5 are essential tools for any audio enthusiast looking to create a rich, immersive listening experience. Through their cutting-edge technology, user-friendly features, and high-quality sound, they stand as great investments for anyone aiming to elevate their audio setup to the next level. Whether for casual listening or hosting gatherings, these multi-room audio controllers deliver performance that meets the diverse needs of today’s listeners.
Top Page Image Contents