Niles Audio RS8Si Granite, RS8Si Sandstone manual Speaker Phase, One-speaker stereo mode

Page 14

INSTALLATION

3.Connect one stripped end of the speaker cable coming from the amplifier to the RS8Si connection cable’s red wire of one cable and the RS8Si connection cable’s yellow wire. To connect the three wires, twist the stripped ends of the wire together and screw down the wire nut on the twisted wires. The material inside the wire nut will protect the stripped ends of the wire. However, if added protection is desired, place a large amount of silicon sealant so the bottom of the wire nut is encased and sealed. Pay attention to the markings on the speaker cable. Each loudspeaker you connect must be connected to the amplifier’s speaker wire in the same way.

4.Repeat step 3 with the RS8Si connection cable’s black wires and the other stripped amplifier speaker cable’s conductor.

5.Connect the opposite end of the speaker cable to the amplifier or receiver. Start by performing step 1 and 2 on the speaker cable near the amplifier. Paying attention to the markings on the speaker cable conductor, attach the same conductor you attached to the red loudspeaker wire to the positive (red) or (+) amplifier output terminal. Attach the other conductor to the amplifier’s negative (black) or (–) amplifier output terminal.

Speaker Phase

Speaker wire has two conductors. One conductor is attached to the negative (black) or (-) terminals and one conductor is attached to the positive (red) or (+) terminals of both the loudspeaker and the amplifier. Usually, the wire is marked for your convenience. There are different ways to mark the conductor; a stripe on one wire, a ribbed area on one conductor that you can feel, different color metal conductor wire inside the insulation, the insulation covering the conductor might be different colors, or there might be a fabric string wound onto one of the conductors. Of course some cables make it difficult to determine which conductor is which. Be careful to avoid mistakes. If you do, one loudspeaker will be playing out of “phase” with the other loudspeaker. An out of phase pair of speakers work against each other and the sound of the two speakers playing together will be lacking in bass response and have a “phasey” sound quality. If you suspect the sound is not right, check to make sure that the conductors on each loudspeaker are attached the same on the loudspeaker and the amplifier. If you cannot see any markings or determine if they are all attached the same, try this simple test:

In one-speaker stereo mode

1.Play some music with the amplifier or receiver set to Mono.

2.Stand in the middle of each speaker and three feet away from it. Listen to the richness of the bass and the loudness of the sound.

3.Turn off the amplifier and reverse the connections on one side of the speaker only.

4.Repeat the listening test with the same setting of the volume controls. If the current sound has a richer bass and is slightly louder than the previous sound, the speakers

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents RS8Si Table of Contents CongratulationsIntroduction Features & Benefits ConeForward Design Dual Connection Cables with Water Resistant Wire NutsDual Precision Crossovers Rigid Acoustically Inert Cabinet ConstructionTools and Materials Required Installation ConsiderationsSingle Speaker Stereo Mode Selecting the number and location for your speakersTwo-speaker Stereo Mode Two-speaker Stereo Coverage with 4 speakers One-speaker Stereo Mode vs. Two-speaker Stereo Mode Choosing the Speaker CableInstallation Considerations Incorporating a Volume ControlTwo-Speaker Stereo Two Zone VC Wiring Recommended Amplifier PowerRun the speaker cable InstallationConnecting the loudspeaker in one-speaker stereo mode Connecting the loudspeaker in two-speaker stereo mode Speaker wire preparationSpeaker Phase One-speaker stereo modeTwo-speaker stereo mode or checking phase between speakers Verify System Operation and Loudspeaker CoverageInstalling the Security Bracket and Cable Bottom of LoudspeakerUpgraded Security Attachment Method Optional To install an upgraded security systemUpgraded Security Attachment Final AdjustmentsOperation Listening at Higher VolumesCleaning Specifications Detach Here Warranty Registration Card Product?Year Limited Warranty Niles Audio CorporationNiles Audio Corporation

RS8Si Sandstone, RS8Si Granite specifications

The Niles Audio RS8Si series, consisting of the RS8Si Sandstone and RS8Si Granite models, represents a remarkable innovation in outdoor audio technology. Designed to deliver exceptional sound quality while blending seamlessly into natural landscapes, these speakers are ideal for patios, gardens, and poolside areas.

One of the defining features of the RS8Si offerings is their rugged design. Both models are constructed with high-quality materials that are resistant to harsh weather conditions, including rain, snow, and intense sunlight. Their UV-resistant finishes ensure that they maintain their aesthetic appeal over time, regardless of environmental exposure. The sandstone and granite finishes allow these speakers to camouflage into their surroundings, providing a discreet audio solution without compromising on sound performance.

The RS8Si speakers utilize advanced audio technology to deliver a rich and immersive listening experience. Each speaker is engineered with a robust 8-inch polypropylene woofer, which provides deep bass and clear mid-range frequencies. Complementing this is a 1-inch aluminum dome tweeter that ensures crisp high frequencies, resulting in a balanced audio spectrum that is well-suited for various music genres and outdoor entertainment.

An additional feature of the RS8Si series is their wide sound dispersion. The speakers are designed to deliver 180-degree sound coverage, allowing owners to enjoy consistent audio throughout larger outdoor spaces. This feature is particularly beneficial for social gatherings, where multiple listeners can enjoy a unified audio experience from different vantage points.

Installation and connectivity are made simple with the RS8Si models. They come equipped with integrated mounting points that ensure secure placement in various outdoor locations, alongside the option for ground or wall mounting. Featuring easy-to-use connections, these speakers support a straightforward setup with a variety of audio systems.

Another noteworthy technology is the speaker’s weather-resistant design, including an all-weather seal that protects the internal components from moisture and debris. This durability, combined with high-quality sound performance, places the Niles Audio RS8Si speakers as a leading choice for outdoor audio applications.

In summary, the Niles Audio RS8Si Sandstone and RS8Si Granite speakers offer a sophisticated blend of durability, aesthetics, and audio excellence. They are designed to withstand the elements while delivering a rich and immersive sound experience, making them perfect for outdoor enjoyment. Whether you’re hosting a summer party or relaxing in solitude, the RS8Si series elevates your audio experience outdoors.
Top Page Image Contents