III. Program Instruction | Gianni Industries DG-11 (Mount) specification

III. Program Instruction:

Enter Program Mode:

1.Enter the master code twice (Factory master is 「12345」)

→2 beeps and the Yellow LED will light up.

→you are now in the "programming mode".

2.Note: After 60 seconds if you have not entered any codes or data, the system will automatically exit from the programming mode. After 6 wrong attempts at the master code the lockout facility will operate.

Exiting from the program mode:

1.Press「#」 to exit from the programming mode.

To Enter a User Code： Enter the Programming mode

1.Enter the slot position code 「＊01~＊10」 →?????（user code 5 digit）→（beep） →enrolled→ Press # to exit from the programming mode, or program other operating.

2.Note: The codes"00000","12345" or master code are not be used for PIN code.

To Program Relocking Timer（relay）：

Enter the Programming mode

A.Press「＊20」Followed by the number of seconds the relay should open→「05」 =5 seconds（01 ~99 = seconds）→（beep）→enrolled → Press 「#」 to exit from the programming mode, or program other operating.

B.Enter「00」Sets the relay to latching mode. (Correct code entered opens the relay, and the relay stays open until the correct code is entered again).

To Delete a User Code：

Enter the Programming mode→ Press the slot position code of your choice to delete (example "06") →Press「＊06」→「00000」→（beep）→delete→Press「#」 to exit from the programming mode, or programming other operating.

To Change the Master codes:

Enter the Programming mode, Enter「＊00」Followed by the new 5 digit master code→ （beep）→enrolled→Enter 「#」 to exit from the programming mode, or program other operating.

IV. Wiring diagram:

12Vdc Power Supply

FAIL-SAFE LOCKING

DEVICE

This reed switch is used

to reset the re-locking time

to 0 second when the door is moved. (Using N.O. contact in case of door closed, changeover to N.C. When door is moved)

		Power in(Red)
		Power in(Red)
		N.O.(Yellow)
V		Com.(Green)
V		N.C.(Blue)	Buzzer
Varistor		N.C.(Blue)	Buzzer
Varistor		P(White)	Relay
	Push Button	P(White)	Relay
	Push Button	B(White)
		B(White)

Contact door reed switch(Pink)

	1		Master Code
	1		Master Code
1		2	resetting to
			Factory Code

2		3
			"12345"
			"12345"
3

Note:

The varistor or diode must be connected across the lock terminal (electromagnet...) operated by the device. The vartistor controls the overload produced by the strike coil (EMP).

Copyright Gianni Industries, Inc. All Rights Reserved.
P-MU-DG10-5C Ver. A Publish:2004.09.07	Page: 2/ 2

DG-11 (Mount) specifications

Gianni Industries is renowned for its innovation in the field of industrial mounting solutions, and the DG-11 Mount exemplifies their commitment to quality and functionality. Engineered for various applications, the DG-11 Mount is designed to provide a robust and flexible mounting solution for both professional and industrial needs.

One of the most remarkable features of the DG-11 Mount is its adaptability. With a multi-directional design, it can accommodate an array of equipment types, ranging from monitors and cameras to industrial sensors. This versatility makes it an ideal choice for diverse settings, including warehouses, manufacturing plants, and broadcast studios.

The DG-11 Mount is constructed from high-quality, durable materials that ensure longevity and stability even under heavy loads. Its corrosion-resistant finish makes it suitable for environments with high humidity or exposure to chemicals, reinforcing its reliability in challenging conditions. The mount is engineered to support a considerable weight capacity, allowing for the secure installation of heavier devices without compromising performance.

Featuring an intuitive installation process, the DG-11 Mount minimizes downtime and complexity. Its pre-drilled holes and included mounting hardware streamline the setup, making it accessible for users with varying levels of technical expertise. The flexible pivot and tilt mechanisms offer easy adjustment, allowing users to achieve the optimal viewing angle for their devices.

Moreover, the DG-11 Mount incorporates advanced shock-absorption technology, which helps in reducing vibrations and impacts. This feature is crucial in industrial settings, where equipment is often subjected to movement and jolts, ensuring that the mounted devices remain stable and function correctly under dynamic conditions.

Another standout characteristic of the DG-11 Mount is its elegant design. While functional, it does not sacrifice aesthetics, making it a pleasing addition to professional environments. The sleek profile allows it to blend seamlessly into various decor styles, from modern to industrial chic.

In summary, the Gianni Industries DG-11 Mount is a testament to innovative engineering, showcasing versatility, durability, and ease of use. With its robust construction, shock-absorption capabilities, and user-friendly installation, it stands out as a premier choice for anyone in need of a reliable mounting solution. Whether for heavy-duty industrial applications or sophisticated professional settings, the DG-11 Mount delivers exceptional performance and adaptability.