Heath Zenith 6280 Series, 6180 Series Jamb or wall is clean, Chime with Attached Decorative Cover

Page 2

 

5. Mount push button. Use either screws or double

 

sided tape to mount push button.

 

Screw Mounting: To mount with screws, remove

 

back of case by pushing in tab on bottom with a small

 

screwdriver (see Figure 1). Note: Remove material in

 

screw holes (if needed) before mounting with screws.

 

Attach back of case to door jamb or wall (see Figure

 

3). Snap front of push button on.

 

Tape Mounting: When attaching push button using

 

double sided tape, make sure the surface of the door

 

jamb or wall is clean.

 

6. Mount chime. Determine mounting location.

Figure 3

There are different ways to mount the chime depending

 

upon the model of chime purchased. Determine which

 

model you purchased below.Mount the chime according

 

to the instructions for your chime.

Chime with Attached Decorative Cover:

1.Drill 1/4" diameter pilot hole for wall anchor (provided) and insert anchor.

2.Screw #8 screw (provided) into anchor. Leave 1/16" gap between screw head and wall.

3.Place hanger over screw to mount chime (see Figure 4).

Sawtooth Hanger

Chime Volume

Sawtooth Hanger

Screw

Jumpers

Figure 4

-2-

595-5506-12

Image 2
Contents Decorative Wireless Chime Series, 6270 Series, and 6280 SeriesJamb or wall is clean Chime with Attached Decorative CoverScrew Mounting Chime with Separate Decorative CoverKeyhole Mounting Tune Settings Chime does not sound TroubleshootingCode Setting Ery Technical Service Regulatory InformationLimited Warranty Campanilla Decorativa Inalámbrica Serie 6180, Serie 6270 yCampana con tapa decorativa fija Campana con tapa decorativa separada Montaje del orificio de alineaciónMontaje del tornillo Figura 6 Campana InternaProgramación del tono InternaLa campana no suena Configuración de CódigosAnálisis de Averías Tery Servicio Técnico Información RegulatoriaGarantía Limitada Carillon décoratif sans fil Série 6180, Série 6270 et sérieAu moyen de ruban adhésif Lorsque vous mon Carillon avec couvercle décoratif en placeCarillon avec couvercle décoratif amovible Arrière du carillonInstallation au moyen des vis Intérieur du carillonRéglage de la mélodie Réglage des codes DépannageLe carillon ne sonne pas Unité de Service Technique Renseignements de règlementsGarantie Limitée 595-5506-12 ’hori

6280 Series, 6270 Series, 6180 Series specifications

Heath Zenith is known for its innovative series of motion-activated and other lighting products, with the 6180, 6270, and 6280 Series being some of the most notable offerings. Each series is designed to cater to different aspects of home security, convenience, and energy efficiency, making them ideal choices for various applications.

The 6180 Series features a robust and stylish design that seamlessly integrates into any exterior decor. These lights utilize advanced motion sensing technology, which ensures they illuminate only when movement is detected, thus conserving energy. The sensitivity and duration settings can be easily adjusted, allowing homeowners to customize the functionality according to their preferences. One notable characteristic of the 6180 Series is its weatherproof construction, designed to withstand harsh environmental conditions. This makes the series a reliable choice for installations in diverse climates, ensuring longevity and consistent performance.

Moving to the 6270 Series, this range emphasizes versatility. It incorporates dual-brightness technology, providing two levels of illumination based on the time of day and movement detection. This feature not only enhances security but also contributes to energy conservation by reducing light output during non-peak hours. The 6270 Series also includes a built-in dusk-to-dawn sensor, allowing the lights to turn on automatically at dusk and off at dawn, ensuring safety and convenience for users.

Lastly, the 6280 Series takes the energy-efficient design further with solar-powered options. This series is perfect for eco-conscious consumers looking to reduce their carbon footprint while maintaining effective outdoor lighting. The solar panels convert sunlight into energy, allowing for sustainable operation without relying on electricity. The motion sensor technology is also integrated, ensuring that the lights only engage when necessary. The 6280 Series is designed with easy installation in mind, enabling homeowners to set up the lights without the need for extensive wiring or professional assistance.

In summary, the Heath Zenith 6180, 6270, and 6280 Series products present unique features and technologies that enhance home security while promoting energy efficiency. From robust motion detection systems to solar-powered options, each series provides a variety of characteristics that cater to the preferences and needs of modern homeowners, ensuring they receive maximum value and performance from their outdoor lighting solutions.