Heath Zenith 598-1143-01 manual Strobe/Tune Settings

Strobe/Tune Settings

Your wireless chime has different selectable tunes: Ding-Dong(two flashes/two notes/two flashes) or Westminster (eight flashes/eight notes/eight flashes). The factory setting is for the Westminster tune. This tune can be changed by following the instructions below.

•Ding-Dong(Two note tune)

Strobe will flash two times, play the two note tune, then flash two more times.

Push button: Add a jumper to location 8.

•Westminster (Eight note tune)

Strobe will flash eight times, play the eight note tune, then flash eight more times.

Push button: Remove jumper from location 8.

Remove screw to open access door

Back of

Push button Battery Replacement

Install an alkaline type A23 12Volt battery. See diagram inside push button for correct battery orientation.

Chime

1234567

12345678

Inside Push

Button

*Code Settings 1-7 Must Match Both Push Button and Chime

Tune Setting

Note: Some models might require the use of tweezers to remove and replace the jumpers.

598-1143-01 - -