Niles Audio CM630, CM610 dimensions See Figure, Painting the Grille and Frame

Page 4

IMPORTANT: DO NOT OVER TIGHTEN THE SCREWS! OVER TIGHTENING THEM MAY MAKE THE GRILLE DIFFICULT TO INSTALL

7.Direct the tweeter. (CM630 only) The tweeter is directed by gently pressing on the outer edge of the tweeter housing. It will move up to 20 degrees in any direction. For critical listening, direct the tweeter towards the user’s favorite listening position. For surround sound or low volume background listening, create more reflections and thus more ambiance by directing the tweeter towards the sidewalls.

(See Figure 4)

8.Install grille desired. Each CM610 or CM630 loudspeaker includes both flush mount aluminum grilles and recessed cloth grilles that masquerade as a light fixture. To install the MicroPerf™ grille, start by positioning one edge of the grille slightly inside the loudspeaker. Gently work around the loudspeaker a little at a time until the grille is fully seated. Don’t try to insert the grille fully in any one area, as this will make complete installation more difficult. Don’t force the grille to fit as you may damage the grille if you apply too much force.

9.To install the recessed light grille option, simply push the plastic grille evenly into the hole until it snaps in place.

10.Connect the other end of each loudspeaker wire to the receiver (or amplifier) carefully observing polarity.

11.Turn on the receiver or amplifier and test all loudspeakers in the system.

PAINTING THE GRILLE AND FRAME

Each CM610 or CM630 loudspeaker and flush-mount metal grille may be painted without the need for primer.

1.Install loudspeaker into ceiling or wall following the previous steps 1 - 6.

2.Remove the smallest perforated circle from the cardboard square template. This is the paint mask that protects the loudspeaker from paint. Gently press it into place inside the baffle.

3.Paint the frame of the loudspeaker.

4.Paint the grille separately from the loudspeaker frame. For best results when painting the grille, use a spray gun or airless sprayer. Thin the paint to prevent clogging of the grille holes and apply several light coats instead of one heavy one. Do not attempt to paint the plastic and cloth grille.

5.Gently remove the paint mask after paint has dried by pressing in the tab in the center and carefully pulling out the mask with your finger. Be very careful not to poke the tweeter with your finger.

6.Finish installation of the loudspeaker following the previous steps 7 –10.

 

 

 

 

 

 

Figure 1. Typical placement for stereo listening.

Figure 2. New construction bracket.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 3. Mounting “dog” rotation.

Figure 4. Tweeter adjustment.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents CM610 CM630 Congratulations Package Contents Installation ConsiderationsExisting Construction Installation Selecting the Location for Your LoudspeakersNEW Construction Installation Concealing Loudspeaker Wire for a Future InstallationUnpacking and Final Installation Insulating the Wall CavitySee Figure Painting the Grille and FrameSpecifications ModelTechnical Support

CM610, CM630 specifications

Niles Audio has long been a trusted name in the world of high-quality audio solutions, and their CM610 and CM630 in-ceiling speakers exemplify this commitment to superior sound design. These speakers are engineered for both performance and versatility, making them ideal options for any home audio setup.

The Niles CM610 features a 6.5-inch polypropylene cone woofer complemented by a 1-inch pivoting dome tweeter. This combination provides a frequency response range from 50 Hz to 20 kHz, ensuring a rich and full sound across all genres of music. The ability of the tweeter to pivot allows for optimal sound direction, enabling users to tailor the listening experience based on room layout and speaker placement.

On the other hand, the CM630 takes the performance a step further with its 8-inch polypropylene cone woofer, which delivers deeper bass response while maintaining clarity in the mids and highs. This model also incorporates a 1-inch pivoting silk dome tweeter, further enhancing the listening experience with its warm and smooth sound characteristics.

Both models feature Niles' innovative installation technologies, including a unique “easy-to-install” mounting system that allows for quick and hassle-free installation. The concealed dog-ear clamps secure the speakers in place, ensuring a snug fit with minimal effort. Additionally, the speakers are designed with paintable grilles and frames, allowing them to blend seamlessly into any ceiling, making them visually unobtrusive.

Durability is another hallmark of the Niles CM610 and CM630. These speakers are constructed with moisture-resistant materials, making them suitable for use in various environments, including kitchens and bathrooms. This design consideration ensures that sound quality is maintained without compromising on longevity.

In terms of connectivity, both speakers are compatible with a variety of audio systems, allowing users to integrate them into multi-room audio setups easily. This flexibility means that whether you are looking to enjoy music in a single room or throughout the entire home, the Niles CM610 and CM630 can deliver exceptional audio quality.

Overall, Niles Audio's CM610 and CM630 in-ceiling speakers offer a blend of innovative technology, aesthetic design, and premium sound performance, making them excellent choices for audiophiles seeking a polished sound experience in their living spaces.
Top Page Image Contents