Heath Zenith 598-1109-06 manual Troubleshooting, Chime does not sound, Code Setting

Page 6

Troubleshooting

A.Low Battery Indicator: When the push button designated for the “Ding-Dong” tone is pressed, only a “Dong” note will play when battery power is low in chime unit.

B.Chime does not sound:

Make sure push button and chime codes are the same (see Figure 9).

Check orientation of push button and chime batteries. (See diagram inside push button and chime for correct battery orientation.)

Check charge of push button and chime batteries, replace if necessary.

C.Chime sounds when not intended (false triggers): Chime is receiving interference from another wireless device; change the code setting (see

Code Setting below).

D.Batteries seem OK, but the chime does not work when installed:

Do not mount chime or push button on metal or near metal studs. This reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move chime or push button off metal surface.

Concrete floors may reduce range. Move chime away from floor.

Try locating chime closer to push button.

E.Code Setting:

It is recommended to only change one code position at a time and then check to see if system is functioning properly.

1.Open the cases and locate the jumpers on the push button and the switches on the chime (see Figure 9).

2.The push button has eight different jumper locations and the chime has seven switches. Jumper positions 1 through 7 on the push button and the switches on the chime are used for setting the code.

3.To change the code, either:

Add a jumper to the push button and set the matching chime switch to “ON” or...

Remove a jumper on the push button and set the matching chime switch to “OFF” or...

Move a jumper on the chime from one location to another. Set the matching two dip switches on the push button to match the jumper settings on the chime.

Example: In the chime, move the chime jumper at location “5” to location “4”. In the push button, set the “5” dip switch to OFF and the “4” dip switch to ON.

-6-

598-1109-06

Image 6
Contents Wireless Mechanical Battery Operated Chime Basic Basic Chime Chime with Separate Decorative CoverChime with Attached Decorative Cover Tune Settings Inside Push ButtonTroubleshooting Code SettingChime does not sound Inside Push Button and Chime Technical Service Regulatory InformationONE Year Limited Warranty Campana mecánica inalámbrica que funciona con pila Campana Campana básica Campana con tapa decorativa separadaCampana con tapa decorativa FijaProgramación del tono Figura 8 Dentro del PulsadorConfiguración de códigos Análisis de AveríasLa campana no suena Nota Algunos modelos podrían Servicio Técnico Información RegulatoriaGarantía Limitada a 1 AÑO Carillon mécanique sans fil, commandé par piles Carillon Carillon de base Carillon avec couvercle décoratif amovibleCarillon avec couvercle décoratif Réglage de la mélodie Unité de bouton-poussoir intérieureLe carillon ne sonne pas Réglage des codesÔter et replacer les cavaliers Service Technique Renseignements de règlementsGarantie Limitée DE 1 AN 598-1109-06

598-1109-06 specifications

The Heath Zenith 598-1109-06 is a sophisticated outdoor motion-sensing light fixture that promises to enhance both security and convenience for residential and commercial properties. As a trusted name in home improvement and lighting solutions, Heath Zenith delivers quality products that combine functionality with modern design.

One of the standout features of the 598-1109-06 is its advanced motion detection technology. Equipped with a high-precision passive infrared (PIR) sensor, this light fixture can detect movement within a certain radius, ensuring that it illuminates only when necessary. This energy-efficient design not only conserves electricity but also reduces wear on the bulb, extending its lifespan. The sensor has an adjustable sensitivity range, allowing users to fine-tune the distance at which it activates.

This model is particularly valued for its customizable settings. Users can adjust the light's duration, ensuring that it remains on for a predetermined period after activation. The adjustable settings provide an added layer of convenience, allowing homeowners to tailor the light's operation to their specific needs. The 598-1109-06 also includes a photocell feature, which allows the light to turn on automatically at dusk and off at dawn, further enhancing its energy efficiency.

In terms of design, the Heath Zenith 598-1109-06 is available in an attractive finish that complements a variety of architectural styles, enhancing the aesthetic appeal of any outdoor space. Its durable construction is designed to withstand the elements, making it suitable for outdoor use even in harsh weather conditions. The fixture is built to last, offering both corrosion resistance and structural integrity.

Installation is straightforward, thanks to the product's user-friendly design and clear instructions. The model can be mounted on a wall or a post, providing versatility in placement. This flexibility allows homeowners to strategically position the light for optimal coverage in driveways, patios, or entryways.

Overall, the Heath Zenith 598-1109-06 is a solid choice for anyone looking to improve their outdoor lighting system. Its combination of cutting-edge motion sensing technology, user-friendly features, and robust design makes it a reliable addition to any property. Whether for enhancing security or simply providing light when needed, this fixture stands out as a practical and attractive solution.