Heath Zenith 3106978 (AC-6196) manual Push Button Battery Replacement

•Ding (one note tune)

Push Button: Add a jumper to location 8.

•Ding-Dong(two note tune)

Push Button: Remove jumper from location 8.

Chime: Remove jumper from location 8.

•Westminster (Eight note tune) (Available on selected chimes) Push Button: Remove jumper from location 8.

Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities. You may purchase any ACE® wireless push button for a second entrance. We recommend the back door use the Ding tune and the front door use the Ding-Dongtune (or Westminster tune, available on selected chimes). Models that include two push buttons will come factory set for front and back doors. Decals on the rear of the push button will indicate its setting.

Remove screw to open access door

Push Button Battery Replacement

Install an alkaline type A23 12 Volt bat- tery. See diagram inside push button for correct battery orientation.

Back of

Chime

12345678

Tune Setting (Not used on all models)

1 2 3 4 5 6 7 8

Inside Push

Button

*Code Settings 1-7 Must Match Both Push Button and Chime

Tune Setting

Note: Some models might require the use of tweezers to remove and replace the jumpers.

598-1076-03 - -