Classic Crafts Door warranty What this Limited Warranty Covers and HOW Long, Coverage

Page 1

Classic-Craft®

Fiberglass Entry Door Systems

Residential Lifetime Limited Warranty

1. WHAT THIS LIMITED WARRANTY COVERS AND HOW LONG

Classic-Craft®Door Systems (“Product”) includes the door, any applied or inserted panels, glass lite inserts, wood grilles, hinges, weather-stripping, door bottom gaskets, corner seals, door sill, multi-point lock system and astragal. This Limited Warranty applies only when all of these parts are genuine Therma-Tru components. Except for wood grilles, other all-wood parts including but not limited to door jambs, mull posts, brickmould, and mull casing are not covered by this Limited Warranty.

a) COVERAGE

Subject to the limitations and exclusions below, and for the duration of the applicable Warranty Period, Therma-Tru Corp. (“Seller”) warrants: (1) that the Product’s non-glass components will be free from non-conformities in material and workmanship; and (2) the Product’s glass components will be free from non- conformities in material and workmanship resulting in internal glazing failure, seal failure, internal insert slippage, and permanent and material visual obstruction from moisture or dust film formation in the air space of the sealed glass unit.

b) WARRANTY PERIOD

Residential Warranty Holder: Lifetime from the date the Product was originally purchased from an authorized dealer. Not transferable.

Commercial/Multi-Resident Warranty Holder: 3 years from the earlier of the date Product was shipped from the Seller or an authorized dealer; transferable to a successor non-residential owner during and for any balance of the 3 year Warranty Period.

c) WARRANTY HOLDER CLASSIFICATIONS

RESIDENTIAL WARRANTY HOLDERS: If the Product is installed in (i) a new residential dwelling and the first occupant owns the dwelling or (ii) an existing owner-occupied residential dwelling, and in each case, at the time of installation such owner is also responsible for Product replacement, then that owner is a Residential Warranty Holder. For example, assume the Product is installed in a condominium unit (a “dwelling”) in a multi-resident building. If the first occupant of the condominium unit is the first owner of that unit and is also responsible for Product replacement, then that owner is a Residential Warranty Holder; however, if the owner is not the first occupant or if someone else other than the owner (for example, the condominium association) is responsible for Product replacement, then the owner is not a Residential Warranty Holder.

COMMERCIAL/MULTI-RESIDENT WARRANTY HOLDERS: If the Product is installed under conditions in which no one qualifies as a Residential Warranty Holder as described above, then the warranty holder is the owner of the dwelling or building in which the Product has been installed at the time of installation (and its builder and contractor). That owner is classified as a Commercial/Multi-Resident Warranty Holder. For example, this includes owners of commercial or investment buildings, or multi-resident premises in which the occupant is not responsible for Product replacement whether or not the occupant owns the residential dwelling unit in the premises (including by example, certain condominiums, town homes, duplexes, apartments, cooperatives).

2. WHAT THIS LIMITED WARRANTY DOES NOT COVER

a) GENERALLY

This Limited Warranty does not include non-conformities or damages attributable to or arising from:

Minor scratches or minor visual imperfections

Negligence; improper use, assembly of the Product (door systems) other than by Therma-Tru (Seller), installation, finishing, maintenance (including failure to maintain finish, see note below) or operation inconsistent with Seller’s recommendations and written instructions that are generally available in Seller’s Product Manual as updated by bulletins or other written communications or on Seller’s Worldwide website www.thermatru.com. **

Improper pre-installation storage, including inadequate shelter or inadequate venting of shipping wrap in humid locations

Misapplication or faulty building design or construction, including inadequate flashings or caulking

Product reinstalled after removal from its original installation

Normal wear and tear, including without limitation, wear and tear to weather-stripping or door bottom gaskets or the multi-point locking system

NOTE: **All Therma-Tru Classic-Craft door systems must be finished within 6 months of the installation date for continued warranty coverage however, all bare or unprotected wood surfaces (such as door frames) should be primed and painted and top coated within the lesser of 2 weeks of installation or exposure to weather. All doors must have all 6 sides finished and on out-swing doors the sides, top and bottom must be inspected and maintained as regularly as all other surfaces.

b) GLASS

This Limited Warranty does not include:

Minor variations in glass color or imperfections that do not affect the glass’s structural integrity or do not permanently and materially obstruct vision from moisture formation between the panes

Glass covered with after-market window films

Accidental glass breakage, including caused by debris or foreign objects striking the glass, or breakage that may occur under conditions exceeding the

Product’s performance parameters

Condensation, frost or mold resulting from humidity within the building and interior/exterior temperature differentials

Stresses from localized heat which cause excessive temperature differentials over the glass

Post-manufacture dissipation of inert gases (as argon), or the amount of gas in Products with inert gas-filled insulating glass

Scratches or other imperfections, unless readily observable more than four feet away

Image 1
Contents Warranty Holder Classifications What this Limited Warranty Covers and HOW LongWhat this Limited Warranty does not Cover CoverageDisclaimer of Warranties This Limited WARRANTY’S Exclusive RemedyLimitation of Liability Claims

Door specifications

Classic Crafts Doors are a remarkable combination of elegance, functionality, and technology, making them an ideal choice for homeowners seeking to enhance both the aesthetic appeal and security of their dwellings. These doors are designed to evoke a timeless charm while incorporating modern advancements that ensure durability and energy efficiency.

One of the main features of Classic Crafts Doors is their construction. Made from high-quality fiberglass, these doors provide the classic appearance of wood without the maintenance hassles associated with traditional timber doors. The fiberglass material is resistant to warping, cracking, and splitting, ensuring your door retains its beauty for years to come. Moreover, the doors are available in a variety of wood grain finishes, including mahogany, oak, and cherry, allowing homeowners to achieve their desired look effortlessly.

Classic Crafts Doors also boast advanced insulation technology. Many models are equipped with energy-efficient cores that significantly reduce heat transfer, enhancing the door’s thermal performance. This not only helps in maintaining a comfortable indoor environment but also contributes to lower energy bills, making it an environmentally friendly choice.

Security is another significant characteristic of Classic Crafts Doors. They often come with reinforced frames and locking systems that provide enhanced protection against break-ins. The robust construction, combined with high-quality hardware, ensures that homeowners can feel secure in their choice.

Aesthetically, Classic Crafts Doors offer a variety of styles and designs to suit different architectural preferences. Whether you lean towards a more traditional appearance with intricate panel designs or prefer a contemporary look with sleek lines, there is a style available that complements any home décor. Furthermore, customizable options for sidelights and transoms enhance the visual appeal while allowing for ample natural light.

Finally, installation of Classic Crafts Doors is typically straightforward, as they are designed for compatibility with standard door frames. This ease of installation means that homeowners can enjoy their new doors without a lengthy renovation process.

In conclusion, Classic Crafts Doors represent a perfect balance between traditional craftsmanship and modern technology, delivering durability, security, and aesthetic appeal. With their variety of styles and high-performance features, they cater to a wide spectrum of homeowner needs, making them a perfect addition to any property.