Chief Manufacturing CM6DH installation instructions Hanging and Adjusting Doors

Hanging and Adjusting Doors

1.Remove door hanger from mechanism by removing locking screws and washers. (See Figure 3)

Figure 3

2.Center door hanger to top of door and secure with eight flat head screws of sufficient length to support weight of door. (See Figure 4)

Figure 4

3.Attach one guidewheel plate (F) to bottom center of each door. (See Figure 5)

(F) x 2

Figure 5

4.Move carriages to one half open position by activating mechanism and pressing button a second time when carriage reaches desired position. (See Mechanism Activation section).

5.Lift door and engage guidewheel into guidewheel space.

6.Tip top of door in, engaging the pendant bolts into keyhole in carriage arms. (See Figure 6)

Figure 6

7.Adjust height and alignment of doors by turning the pendant bolts. (See Figure 7)

8.After adjustment is complete, replace the washers and locking screws. (See Figure 7)