Door Thickness, Backset Finishes, Audit Trail

A L A R M L O C K

Trilogy Series

ALARM

LOCK

Specifications

Operation:

Clutch mechanism permits turning lever without retracting latch and reduces stress on lock body and spindle. Outside lever is free turning in locked position. Entering access code, key bypass, or remote bypass will allow lever to retract latch. Inside lever always allows egress.

Door Thickness:

1-5/8" to 1-7/8". (Call for other thicknesses).

Backset:

Finishes:

US3, US26D, US26, US5, 10B.

Power:

Five AA alkaline batteries, supplied.Audible low battery alert, visual and audible entry indicators, unique Flex Drive® motor. 100,000 cycles typical.

Door Prep:

Standard ANSI A115 Series Prep, modified by adding additional through-bolt holes.

2-3/4" Standard. 2-3/8" backset also available.

Keypad:

All metal, 12 button programmable for multi-level access functions including group or individual user codes, master and management codes, passage and emergency or service code, lockout and remote override capability and allowable entry time from 5-15 seconds.

Standard Key Override Cylinder:

Solid brass 6 pin tumbler cylinder pinned 5, SC1 keyway, furnished in all locks. Additional tailpieces included: Schlage, Corbin/Russwin, Sargent, ASSA, Ilco and Lori cylinders.

Audit Trail:

Entry activity log can be polled to the Data Transfer Module (AL-DTM), any PC using DL-Windows Software, and/or can be on-site printed using the hand-held infrared printer (AL-IR1). Activities included are: unlock/lock events, program mode changes, user entry, keypad lockout, remote release events, unauthorized code attempts, etc.

Interchangeable Core Models:

Accepts 6 & 7 Pin Cylinders from: Best,Arrow, KSP, Medeco Keymark & Kaba Peaks. Also available IC Core models for Yale, Medeco, Sargent, Corbin/Russwin and Schlage.

Alarm Lock Tailpiece is supplied; IC Core is not included.

Latchbolt:

U.L. Listed, fire rated, 3 hours, 1/2" throw, solid brass, deadlock- ing. Reversible.Adjustable front for flat or beveled doors.

Strike:

1-1/8" x 2-3/4" T strike & 1-1/4" x 4-7/8" ANSI strike included. With screws for wood or metal jambs.

Latch Front:

1-1/8" x 2-1/4" wrought brass or stainless steel.

Handing:

Non-handed.

Compliances:

Grade 1, heavy duty cylindrical lockset, U.L. listed. ADA compli- ant levers. Meets requirements of UL10C.

Accessories:

AL-IR1 hand held infrared printer; AL-DTM Data Transfer Module; DL-Windows (software);AL-PCI interconnect cable

Note: See page 72 for accessories