Strikes, Attaching Screws, List No Ansi Strike

STRIKES

Yale® 5400LN locksets are supplied standard with a 497 ANSI strike.

A variety of optional strikes are also available. All strikes are located on the same vertical and horizontal center lines as the latchbolt. Some strikes are available in a variety of lip lengths to accommodate varying thickness of doors and frames. To determine the proper length of the lip, measure from the center line of the strike to the edge of the jamb and add 1/4" (6mm). All strikes are reversible.

List No. 497 ANSI Strike

1-1/4" supplied standard with 5400LN. 1-1/8", 1-1/2", and

1-3/4" lip lengths available by special order. For door and frames with ANSI A115.2 preparations.

List No. 495 Strike

1-1/4" curved lip, wrought box supplied. 1", 1-1/2", 1-3/4" and 2" curved lip lengths available by special order.

List No. 497B Blank ANSI Strike Available to special order. Installed in frame with standard ANSI A115.2 preparation to replace the strike when the lockset has been removed from the door.

List No. 202 Strike Box Available to special order. Specify 497 x 202.

ATTACHING SCREWS

For List No. 495

#8-8-32 x 3/4" (19mm) Phillips flat head combination wood and machine screws. P/N 81-2012-0416

For List Nos. 497 and 497B #12-12-24 x 1" Phillips flat head combination wood and machine screws. P/N 81-2012-0620

NOTE: When ordering strike or attaching screws individually, specify the finish required; i.e. 497 x 202 x 606.

Page 12

5400LN Series Cylindrical Lock