Install the outdoor unit

Install the connection pipe

1.Align the center of the piping flare with the relevant valve.

2.Screw in the flare nut by hand and then tighten the nut with spanner and torque wrench refer to the diagram at right.

Note: Exceeding tightening torque will damage the flare surface.

Tightening torque table

Hex nut diameter (mm)	Tightening torque (N.m)
6	15~20
9.5	31~35
12	50~55
16	60~65

Torque wrench

Spanner

Nut ofJoint connection pipe

Fig.7

Electric wiring connection

1.Remove the front side plate (Fig.8)

2.Break through the hole for wires and put on rubber bush. 3.Pull all wires throught the rubber bush.

4.Remove the wire clamp and connect the end of the power connection cord with screws to the wiring terminal board according to the “WIRING DIAGAM” of outdoor unit.

5.Make sure that the wiring has been connected firmly. 6.Tighten the wire with clamp and clasp.

control cord

5 0 . 7 5

(for CE stander5 1.0 )

	red
blue
brown	yellow-green
wire clamp	power supply cord
heat pump type only

hole

front side plate

rubber bush

power connection cord

control cord

Fig.8

Wire clamp

NOTE:

Wrong wiring connection will cause electrical mal-

function.

Do not pull the wire when fixing it with wire clamp.

Do not let the wire too loose in the outdoor unit.

Wire clasp

2 6

ASH-24CN specifications

The Sinclair ASH-24CN is a state-of-the-art sailplane that has gained significant attention among aviation enthusiasts and glider pilots alike. Designed and manufactured by the renowned Sinclair company, this glider represents a perfect blend of advanced technology, aerodynamic efficiency, and user-friendly features, making it an exemplary choice for both recreational sailing and competitive flying.

One of the standout features of the ASH-24CN is its impressive wingspan, which typically measures around 24 meters. This extended wingspan not only enhances soaring performance by allowing for better lift-to-drag ratios but also provides excellent stability in various weather conditions. The wing design incorporates sophisticated aerodynamics, with winglets that reduce induced drag and improve overall efficiency during flight.

The ASH-24CN utilizes advanced composite materials throughout its construction. This use of materials such as carbon fiber and fiberglass ensures a lightweight structure while maintaining high strength and durability. This combination allows pilots to maximize their performance while also enjoying the benefits of an easy-to-handle glider.

In terms of cockpit design, the ASH-24CN offers a spacious and ergonomic environment for pilots. The glider is equipped with a comfortable seat, clear visibility for optimal situational awareness, and intuitive controls that enhance ease of operation. The cockpit is also fitted with modern instrumentation, including digital displays that provide essential flight data and navigation information at a glance.

Another significant characteristic of the ASH-24CN is its versatility. The glider is suitable for a range of flying activities, including cross-country soaring competitions and leisure flights. Its performance capabilities are further enhanced by the innovative aerodynamics, making it an ideal choice for pilots looking to challenge themselves in various soaring conditions.

Furthermore, the ASH-24CN supports advanced avionics technology, allowing pilots to tap into real-time weather data and navigation assistance systems. This integration of technology enhances safety and situational awareness, which are paramount in flying activities.

In conclusion, the Sinclair ASH-24CN stands out in the world of sailplanes due to its combination of advanced technology, lightweight construction, and pilot-friendly design. With its impressive performance characteristics, innovative features, and versatility, it is well-suited for both seasoned pilots and those new to the world of gliding. Whether soaring through the skies for leisure or competing in challenging environments, the ASH-24CN promises an exhilarating experience for any aviation enthusiast.