LG Electronics LVC-C553, LVC-C533, LVC-C530, LVC-C513 manual Motion Detection SET, Detection Mode Set

Page 28

MOTIONDET

7. MOTION DETECTION SET

7-1. DETECTION Mode Set

A) Set “MOTION” in main menu using Tele/Wide key.

B) Select the “DETECTION” in submenu using Tele/Wide key.

C) Set the mode ON, OFF using Focus key.

7-2. LEVEL ADJUST Set

This function is available for DETECTION mode.

A)Select the “LEVEL SET” in submenu using Tele/Wide key.

B)Adjust the level from 0 to 21 using Focus key.

7-3. DAY/NIGHT Set

This function is available for DETECTION mode.

A)Select the “DAY/NIGHT” in submenu using Tele/Wide key.

B)Select a mode using Focus key (AUTO, DAY, NIGHT). Note: This function is fixed to "DAY" for model LVC-C500/C503.

7-4. INITIAL SET

If initial mode set to ON, All MOTION functions are changed to the factory setting

A)Select the “INITIAL SET” in submenu using Tele/Wide key.

B)Set the initial set mode to ON or OFF Using Focus key.

7-5. RETURN TO MAIN MENU

This function is exit to main menu.

28

A) Select the “RETURN” in submenu using Tele/Wide key.

B) Set the return mode Using Focus key.

Image 28
Contents Operating Instructions Electric SHOCK, do not Remove Contents and Features Power Supply Operating Controls and Their Functions Power In / Control Model LVC-C500, LVC-C503External Key A/D Lens mount cap Video outputBNC typeModel LVC-C530, LVC-C533 Power In / Control External Key A/D DC 12V screw terminal Hot KeyConnections Power ConnectionConnection the monitor Control Using TELE, WIDE, F. NEAR, F. FAR button Menu DescriptionsCamera ID Camera IDFocus Mode SET Zoom Speed Set This function is for selection of zoom speed Return to Main Menu Initial SETThis function is exit to main menu AWB SET Auto White Balance WB Mode Set This function is for changing the WB modeAWB SET Push Auto AE SET Auto Exposure AE Mode Set This function is for changing to AE modeAE SET Backlight Set This function is available for Slow mode / Auto modeSensitive Flickerless Set This function is available for Auto mode Return to Main Menu This function is exit to main menuAE Level Auto Exposure BLC Level Set This function is for change to BLC LevelWDR Level SET This function is for change to WDR LevelSharpness Adjust Set Color Set This mode is for B/W modeSpecial SET Special SETSet the mode, none, mirror, v-flip, rotation using Focus key DAY/NIGHT Set This function is available for Detection mode Detection Mode SetMotion Detection SET OSD Disp OSD Disp Function On Screen DisplayFunction Set Mode SET Masking Privacy MaskingMasking Area SEL MaskingMove PT CNT PM SET ENDINI Color ColorInitial SET On Screen Display FunctionFunction Specifications Image deviceNo 3834RS0075A 在您使用此摄像机之前,请完整阅读此操 作指南以供参考。 或后盖 此电动变焦彩色摄像机是为监视系统专门设计的。 此摄像机必须始终使用 12V DC 电源 Tele WideVideo Jack DIN JackLVC-C500, LVC-C503 线控示意图 LVC-C530, LVC-C533 为电缆颜色。(如果提供) RS232S 线控示意图 RJ45 如图所示去掉电源线外面的绝缘层 装上端子头 遥控线连接到下面的 RJ-45插孔 对于 RS-485接口 基本 Tele Wide F. Near F. FAR FOCUS+ 拉长焦距 和 FOCUS- 拉近减少 用于 Increase 增加 和Page 使用对焦键在 1cm 到 5M 之间设置对焦距离模式 1cm, 10cm, 50cm, 1M, 3M, 5M 使用对焦键设置变焦速度 Slow 低 Middle 中 Quick 快 Focus SET AWB Manual WBPush Auto Push Auto WB on WB On AWB Iris MAN Slow MAN/SHUTTER MANAuto Slow AutoFlickerless Auto ShutterBLC Level WDR Level使用 Tele / Wide 和对焦键设置标题位置和数据 On Special Detection Detection onOnmotion OSD OSDMasking 此功能可移动 Move PT SEL 中的选定点 使用对焦键设置返回模式 在数码变焦位置您不能设置 P Masking 模式 OSD 以下某些功能在操作摄像机时 会在屏幕上显示 5 秒钟后消 失保留最后自动追踪的白平衡 手动 电子快门速度模式 OSD 英语