LG Electronics LSU-HSV2, LSN, HV2 Socket which is damaged, Your health, Product damage

Page 4

Safety Precautions

Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly so that there is no force pulling the cable from the connection terminals.

Improper or loose connections can cause heat generation or fire.

Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installation or svc and then tear away and throw away the plastic packaging bags.

Children may play with them and cause injury.

Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the plug completely.

Dirty, loose or broken power plug can cause electric shock or fire.

Be sure to check the refrigerant to be

Don't use a power cord, a plug or a loose

used. Please read the label on the product.

socket which is damaged.

Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out

Incorrect refrigerant used can prevent the normal operation of the unit.

Do not place a heater or other heating appliances near the power cable.

There is risk of fire and electric shock.

Do not use the product in a tightly closed space for a long time. Perform ventilation regularly.

Oxygen deficiency could occur and hence harm your health.

Otherwise it may cause a fire or electrical shock.

Do not allow water to run into electric parts. Install the unit away from water sources.

There is risk of fire, failure of the product, or electric shock.

Do not open the front grille of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)

There is risk of physical injury, electric shock, or product failure.

There is risk of electric shock or fire.

Do not store or use or even allow flammable gas or combustibles near the product.

There is risk of fire.

If strange sound, smell or smoke comes from product.Immediately turn the breaker off or disconnect the power supply cable.

There is risk of electric shock or fire.

Ventilate the product room from time to

Turn the main power off and unplug the

time when operating it together with a

unit when cleaning or repairing the

stove, or heating element etc.

product.

• Oxygen deficiency can occur and hence harm

• There is risk of electric shock.

your health.

 

Take care to ensure that nobody

Take care to ensure that power cable

especially kids could step on or fall onto

could not be pulled out or damaged

the outdoor unit.

during operation.

• This could result in personal injury and

• There is risk of fire or electric shock.

product damage.

 

When the product is not to be used for a long time, disconnect the power supply plug or turn off the breaker.

There is risk of product damage or failure, or unintended operation.

Do not place ANYTHING on the power cable.

There is risk of fire or electric shock.

Do not plug or unplug the power supply plug to turn the unit ON/OFF .

• There is risk of fire or electric shock.

When flammable gas leaks, turn off the gas and open a window for ventilation befor turning on the product.

Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

Two or more people must lift and transport the product.

Avoid personal injury.

Keep level even when installing the product.

To avoid vibration or noise.

Do not install the product where it will be exposed to sea wind (salt spray) directly.

It may cause corrosion on the product.

Do not install the product where the noise or hot air from the outdoor unit could damage or disturb the neighborhoods.

It may cause a problem for your neighbors and hence dispute.

Install the drain hose to ensure that the condensed water is drained away properly.

A bad connection may cause water leakage.

Always check for gas (refrigerant) leakage after installation or repair of product.

Low refrigerant levels may cause failure of product.

4Air Conditioner

Image 4
Contents AIR Conditioner Table of Contents Before using it again Product by yourselfAge It may cause product to fallDo not place Anything on the power cable Keep level even when installing the productSocket which is damaged ProductInstalling the product Uninstalling itWater etc Refrigeration systemElectrical Safety Symbols used in this ManualTemporary Use of an Adapter Temporary Use of an Extension CordProduct Introduction Indoor UnitsOperation Indication Lamps Outdoor UnitHow to insert the Batteries Wireless Remote Controller MaintenanceOperating Instructions Operating MethodWireless Remote Controller Timer BUTTONbefore adjustingPlasma BUTTONOptional LED Luminosity BUTTONOptionalUsed to set sleep mode auto operation Optional2 Used to save EnergyPress the ON/OFF Button to turn the unit on Operation ModeUnit will respond with a beep Auto Changeover Operation Optional Auto OperationOptionalHealthy Dehumidification Operation For Cooling ModelAuto Clean Operation Activated by pressing the Operation Mode SelectionAir Circulation Operation Plasma Purification OperationOptionalEnergy-Saving Cooling Mode Optional Setting the Current TimePress the Timer Button For 3 seconds Display Luminosity OptionalTimer Setting To cancel the timer settingSleep Mode Operation Cooling mode or healthy dehumidification modeHorizontal Vane Control Vertical Louver Control OptionalStep Step Auto SwingJet Cool/Heat Operation Moisture Cooling Operation OptionalForced operation Heat pump ModelMaintenance and Service Indoor UnitOperation Tips Self-Diagnosis FunctionWastes electricity Is in operationTroubleshooting Tips! Save time and money Call the service immediately in the following situationsAir Conditioner Service call Number # 888 LG Canada, 888 LG-Canada Canada

LSU-HSV2, HV2, LSN specifications

LG Electronics has consistently been at the forefront of innovation in the HVAC (heating, ventilation, and air conditioning) industry. Among its notable offerings is the LSN, HV2, LSU-HSV2 series, which exemplifies superior technology combined with energy efficiency. This series is designed to meet the diverse needs of residential and commercial applications, providing optimal comfort and convenience.

One of the hallmark features of the LSN, HV2, LSU-HSV2 series is its inverter technology. This advanced system allows for variable-speed operation, which adjusts the compressor's speed based on the cooling or heating demands of a space. This leads to significant energy savings compared to traditional fixed-speed systems, as the compressor does not have to operate at full capacity all the time. Consumers enjoy a comfortable indoor climate while minimizing energy consumption.

The units are equipped with a dual inverter compressor, which is designed for quieter operation. This technology not only enhances the comfort of a space but also contributes to a peaceful environment, making it ideal for bedrooms, offices, and other quiet areas. With sound levels as low as 19 dBA, users can enjoy cooling or heating without disruptive noise.

Another remarkable feature of the LSN, HV2, LSU-HSV2 series is its reliable air purification system. These units come with advanced filters that help in removing dust, allergens, and other pollutants from the air. This makes them especially beneficial for individuals with allergies or respiratory issues, providing cleaner and healthier indoor air quality.

Moreover, the series showcases user-friendly smart technology. Through integration with LG’s smart home systems, users can control their HVAC units via a smartphone application. This feature allows for remote monitoring and control, enabling users to adjust settings whether they are at home or away. The ability to set schedules and optimize energy usage is a significant advantage, particularly for those looking to enhance efficiency and reduce costs.

In addition to these features, the design of the LSN, HV2, LSU-HSV2 is sleek and contemporary, ensuring it can blend seamlessly into various interior décors. The units are also designed for durability and reliability, managing to deliver performance even in challenging environmental conditions.

In summary, the LG Electronics LSN, HV2, LSU-HSV2 series stands out with its combination of advanced inverter technology, quiet operation, air purification capabilities, and smart technology integration, making it a superior choice for anyone seeking efficient and effective heating and cooling solutions.