Finishing the Installation

CONNECTING & INSTALLING THE LOUDSPEAKER

1.Remove the magnetic grille by starting at a corner and gently pulling the grille outwards as you work around the edges.

2.At each loudspeaker, route the wire through the provided channel to the input connectors, then separate the loudspeaker wire so that at least 2 inches of each conductor are free. Strip away 1/4 inch of insulation from each loudspeaker wire.

3.On each set of loudspeaker connectors, press down the spring-loaded connector, insert the appropriate conductor, and then release the connector, as shown in Figure 5. Gently tug on the loudspeaker wire to make sure it is held in place. If not, repeat this procedure until it is.

NOTE: OBSERVE CORRECT POLARITY: POSITIVE (+) GOES TO THE RED POST AND NEGATIVE

(–)GOES TO THE BLACK POST. IF YOU ARE UNSURE OF WIRE POLARITY, SEE THE SECTION, CHECKING LOUDSPEAKER PHASE ON PAGE 9.

4.Connect the other end of each loudspeaker wire to the receiver (or amplifier) in the same way. If you are unsure of wire polarity, see the next section, CHECKING LOUDSPEAKER PHASE on page 9.

5.Check that loudspeaker is level and then tighten the eight large screws using a #2 Phillips bit. This should pull the frame and mounting dog together (sandwiching the drywall) so that the frame is absolutely flush with the wall surface. There should be no gaps between the wall and the frame. See Figure 6.

6.Remove cardboard paint mask / template from the box and keep for future potential use.

7.Turn on the home theater receiver and calibrate all loudspeakers in the system according to the receiver manufacturer’s instructions.

IMPORTANT: DO NOT OVER TIGHTEN THE SCREWS! OVER TIGHTENING THEM MAY MAKE

THE GRILLE DIFFICULT TO INSTALL.

Figure 5. Connecting a loudspeaker wire to the terminals.

IW2670LCR, IW2770LCR, IW2650LCR, IW2550LCR specifications

Niles Audio has established itself as a pioneer in high-performance home audio solutions, and their in-wall speakers, including the IW2670LCR, IW2770LCR, IW2550LCR, and IW2650LCR, exemplify this commitment to excellence. These speakers are designed to seamlessly blend into any home décor while delivering exceptional sound quality.

The IW2670LCR is a three-way in-wall speaker known for its versatility. It features a 6.5-inch polypropylene woofer that delivers rich bass and midrange response, while dual 1-inch silk dome tweeters provide crisp highs. The speaker’s adjustable tweeter and midrange controls allow for tailored sound performance, accommodating various room acoustics. Additionally, its low-profile design ensures a sleek and unobtrusive look.

Moving to the IW2770LCR, this model is a standout choice for audiophiles seeking immersive sound for home theaters. It features dual 7-inch woofers and 1-inch aluminum dome tweeters, delivering powerful sound dynamics and wide frequency response. Whether you are watching movies or listening to music, the IW2770LCR ensures a captivating audio experience. The integrated mounting system simplifies installation, minimizing the effort needed to set up these impressive speakers.

For those looking for a more compact solution without compromising on sound quality, the IW2550LCR offers an excellent alternative. This 5.25-inch two-way speaker is equipped with a polypropylene woofer and a 1-inch silk dome tweeter, producing clear sound across frequencies. Its innovative design includes a paintable grille, allowing it to blend seamlessly with any wall color or finish.

The IW2650LCR rounds out this lineup with its robust 6.5-inch woofers, designed for both home theater and music applications. This dual-channel speaker offers balanced sound, ensuring that dialogue in movies is crystal clear while also providing the depth required for music playback.

Each of these models incorporates Niles’ signature technologies, such as a durable construction that minimizes distortion and enhances longevity, ensuring that these speakers deliver high-quality audio performance for years to come. With their remarkable features and exceptional sound quality, Niles Audio in-wall speakers are ideal for homeowners seeking a blend of aesthetics and auditory excellence. Whether for casual listening or immersive home theater experiences, these speakers meet diverse audio requirements and offer an unbeatable sound solution for any space.