LG Electronics MFL41604505 owner manual Product

Page 4

Safety Precautions

Indoor/outdoor wiring connections must be

Safely dispose off the packing materials. Like

secured tightly and the cable should be routed

screws, nails, batteries, broken things etc

properly so that there is no force pulling the

after installation or svc and then tear away

cable from the connection terminals.

and thraw away the plastic packaging bags.

• Improper or loose connections can cause

• Children may play with them and cause

heat generation or fire.

injury.

Be sure to check the refrigerant to the

Don't use a power cord, a plug or a loose

used. Please read the label on the product.

socket which is damaged.

Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the plug completely.

•Dirty, loose or broken power plug can cause electric shock or fire.

Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out

•Incorrect refrigerant used can prevent the normal operation of the unit.

Do not place a heater or other heating appliances near the power cable.

•There is risk of fire and electric shock.

•Otherwise it may cause a fire or electrical shock.

Do not allow water to run into electric parts. Install the unit away from water sources.

•There is risk of fire, failure of the product, or electric shock.

•There is risk of electric shock or fire.

Do not store or use or even allow flammable gas or combustibles near the product.

•There is risk of fire.

Do not use the product in a tightly closed space for a long time. Perform ventilation regularly.

•Oxygen deficiency could occur and hence harm your health.

Do not open the front grille of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)

•There is risk of physical injury, electric shock, or product failure.

If strange sounds, smell or smoke comes from product.Immediately turn the breaker off or disconnect the power supply cable.

• There is risk of electric shock or fire.

Ventilate the product room from time to

Turn the main power off and unplug the

time when operating it together with a

unit when cleaning or repairing the

stove, or heating element etc.

product.

• Oxygen deficiency can occur and hence harm

• There is risk of electric shock.

your health.

 

When the product is not to be used for a long time, disconnect the power supply plug or turn off the breaker.

• There is risk of product damage or failure, or

unintended operation.

Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit.

•This could result in personal injury and product damage.

Do not plug or unplug the power supply plug to turn the unit ON/OFF .

•There is risk of fire or electric shock.

Take care to ensure that power cable could not be pulled out or damaged during operation.

•There is risk of fire or electric shock.

When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.

•Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

Do not place ANYTHING on the power

cable.

• There is risk of fire or electric shock.

For inner cleaning, contact an Authorized

Service Center or a dealer.

Do not use harsh detergent that causes

corrosion or damage on the unit.

• Harsh detergent may also cause failure of

product, fire, or electronic shock.

Two or more people must lift and transport the product.

•Avoid personal injury.

Keep level even when installing the product.

•To avoid vibration or noise.

Do not install the product where it will be exposed to sea wind (salt spray) directly.

•It may cause corrosion on the product.

Do not install the product where the noise or hot air from the outdoor unit could damage or disturb the neighborhoods.

•It may cause a problem for your neighbors and hence dispute.

Install the drain hose to ensure that the condensed water is drained away properly.

•A bad connection may cause water leakage.

Always check for gas (refrigerant) leakage after installation or repair of product.

•Low refrigerant levels may cause failure of product.

4Room Air Conditioner

Page 3 Page 5
Image 4
Page 3 Page 5
Contents AIR Conditioner Table of Contents Be sure not to do Be sure to follow the instruction There is risk of fire, electric shock, explosion, or injuryProduct Refrigernat gas can cause frostbite cold burn Moisture may condense and wet or damage furnitureThey may burn or explode This could harm to your healthElectrical Safety Symbols used in this ManualTemporary Use of an Adapter Temporary Use of an Extension CordProduct Introduction Indoor UnitsOperation Indication Lamps Outdoor UnitHow to insert the Batteries Wireless Remote Controller MaintenanceOperating Instructions Operating MethodRemote Control Operation Operation ModeOperation Procedure Speed cooling operates super high fan speed in cooling modeSet the fan speed Cooling OperationDisplay shows high fan Speed This mode dehumidifies without overcooling Healthy Dehumidification Operation ModeSelect Healthy Dehumidification Operation Timer control Setting Heating OperationHeat pump model onlyJet Cool Operation Forced operation Test operationVertical / Horizontal Airflow Direction Control Optional Direction ButtonMaintenance and Service Indoor UnitOperation Tips Turn off the circuit breaker, and disconnect the plugTroubleshooting

MFL41604505 specifications

The LG Electronics MFL41604505 is a genuine replacement part designed specifically for certain models of LG washing machines. As part of LG's commitment to quality and durability, this component reflects the company's engineering excellence and attention to detail. Understanding the main features, technologies, and characteristics of this part can aid consumers in ensuring optimal performance of their washing machines.

One of the standout features of the MFL41604505 is its robust construction, designed to withstand the rigors of everyday laundry tasks. This part is made from high-grade materials that not only provide strength but also resist wear and tear over time. Consumers can expect this replacement part to maintain its integrity, ensuring the washing machine operates efficiently for years to come.

The MFL41604505 is compatible with various LG washing machine models, which enhances its versatility. This adaptability ensures that a wide range of LG customers can benefit from this reliable replacement part, thus minimizing downtime and improving overall laundry convenience. Replacing worn or damaged components is essential in maintaining the washing machine's performance, and the MFL41604505 simplifies this process.

In terms of technology, the MFL41604505 is engineered to support LG’s advanced washing technologies. This includes features like TurboWash, which reduces wash times while maintaining cleaning performance, and the 6Motion technology that utilizes different wash motions for a comprehensive cleaning experience. By ensuring compatibility with these innovative technologies, the MFL41604505 enables users to continue enjoying the full spectrum of their washing machine’s capabilities.

Moreover, installation of the MFL41604505 is straightforward, making it accessible for DIY enthusiasts. Clear instructions often accompany the part, guiding users through the replacement process. This ease of installation not only saves time but also reduces labor costs associated with professional repair services.

In summary, the LG Electronics MFL41604505 is a vital component for maintaining the efficiency and effectiveness of LG washing machines. Its durable construction, compatibility with various models, support for advanced washing technologies, and user-friendly installation process make it an excellent choice for consumers seeking reliable performance in their laundry appliances. By opting for genuine LG parts like the MFL41604505, users are assured of quality and peace of mind.
Top Page Image Contents