Memorex MX7300 manual Setting Radio Presets, Recalling Radio Presets 20 Each Band

OPERATING INSTRUCTIONS (CONTINUED)

SETTING RADIO PRESETS

This unit can preset 20 AM and 20 FM radio stations for convenient recall.

1 2

Press the ON/STANDBY button	Press the TUNER Function button
to turn the unit on; the IR/Standby	to select the radio.
indicator will turn off.	Press the TUNER/BAND button
	again to select AM or FM.

3
2	1
Press the Tune/Skip/Search n 1

or o 2 button to select a station.

4	1	0
		2
		3

5

6

3 5

Press the MEMORY button 1; the preset number will blink in the display. Within three seconds, press the REPEAT/MEM Up button 2 or RANDOM/MEM Down button 3 until the desired memory number appears on the display.

NOTE: You can also use the Number buttons to select the preset number.

Press the MEMORY button again to set the station in the selected memory.

NOTE: If you use the Number buttons to select a preset, it is no longer necessary to press the MEMORY button again to set the station into the selected memory; the station will be set automatically after you press the Number button(s).

Repeat steps 3 through 5 to program up to 20 stations in each band, if desired.

In case the main power supply is interrupted, the memory presets will be erased.

RECALLING RADIO PRESETS (20 EACH BAND)

1

1 2

2

1

2

3	1	1	2	3
		4	5	6
		7	8	9
			0	2

Follow steps 1 and 2 above.

Press the REPEAT/MEM Up 1 or	You can directly select a preset
RANDOM/MEM Down 2 button to	using the number buttons 1. If
select a preset; the station will	selecting a preset over 9, press
automatically be tuned in.	the ≥10 button 2, followed by the
	two digits.

9