Lasko 2108 manual Ensamblado, Paso

Page 4

MODEL 2108

MODEL 2535

MODELO 2108

OPERATION (Figures 4 and 5)

This Fan may be operated by the Manual Controls located on top of the unit (as shown in Figure 4) or by the Remote Control (shown in Figure 5).

1. Place the Fan on a firm and level surface.

CAUTION: Plastic or rubber tabs, like the feet on this unit, may stick to furniture surfaces and/or hardwood floors. The unit may leave a residue that could darken, stain or leave permanent blemishes on the finish of certain furniture sur- faces, including wood surfaces, and/or hardwood floors.

2. Plug the cord set into a 120 volt outlet.

Be sure that the plug fits tightly into outlet.

When plugs fit loosely into receptacles, they may slip partially or completely out of the receptacle with only the slight movement of the attached cord. Receptacles in this con- dition may overheat and pose a serious fire hazard; if covered by a curtain or drape, the fire hazard is even greater.

3.Turn the Fan ON by pressing the Power Button ().

4.SPEEDS: Press the Fan Speed Button () to desired speed setting. Each time the Fan Speed Button is pressed, the speed will change from High (3), to Medium (2), to Low (1). When the Fan is turned OFF and ON again, the unit will resume the speed at which it was turned OFF.

5.OSCILLATION: Press the Oscillation Button () to start and stop the oscillation function.

6.TIMER: The timer function allows the unit to be set to operate for a length of time from 1 hour to 7 hours, in increments of 1 hour. Press the Timer Button () to set the length of time desired. Each time the timer button is pressed, the time is increased by 1 hour. After reaching 7 hours, pressing the timer button once more will reset the Fan to continuous running. The lights on the front of the unit will light up appropriately with the length of time that the Fan is set for.

7.To turn the Fan OFF, press the Power Button () and unplug the unit from the electrical outlet.

ENSAMBLADO

1.Cuidadosamente retire el ventilador de la bolsa plástica y de la caja de cartón. Para fácil ensamblado, apoye el ventilador de modo tal que la parrilla frontal y el panel de control apunten hacia arriba.

2.Tome las 3 bases de soporte y ensámblelas entrelazando la base frontal con la base trasera (Figura 1).

3.Pase el cable de alimentación eléctrica por el canal del cable situado en el centro de la base (Figura 2).

4.Alinee los orificios de la base de soporte con el inserto roscado en la parte inferior del ventilador. Asegure los (4) tornillos mariposa en los cuatro agujeros en la parte inferior de la base (Figura 3).

5.Dirija el cable de alimentación eléctrica por detrás de la base de soporte como se muestra (Figura 3).

Orificio del

Orificios de laCordon base de soporte

Paso 1

Figura 2

 

Oscillation

Base

 

Trasera

 

Button

 

 

 

Power

 

 

Button

 

Speed Button

Base

Ensamblado de la base

 

 

Frontal

de soporte

 

 

Figura 1

 

Timer Button

 

Figure 4

Cable Eléctrico

Figura 3

New 10/10

4

2108ES

New 10/10

9

2108ES

Image 4
Contents Important Instructions Operating Manual Oscillating Tower FANGarantía Limitada DE Lasko PRODUCTS, INC Servicio AL ClienteRead all instructions before using this Fan Control Remoto FiguraAssembly StepEnsamblado PasoRemote Control Figure Conserve Estas InstruccionesLea todas las instrucciones antes de usar este Ventilador Instrucciones Importantes DE SeguridadMaintenance Instrucciones Importantes Manual DE OperaciónLEA Y Guarde Estas Instrucciones CON Control Remoto

2108 specifications

The Lasko 2108 is a versatile and powerful oscillating fan designed to provide effective cooling and ventilation in various living spaces. Known for its sleek design and user-friendly features, the Lasko 2108 stands out in its category for both performance and aesthetics.

One of the primary features of the Lasko 2108 is its three-speed motor, allowing users to customize airflow according to their specific needs. Whether you’re looking for a gentle breeze or a more powerful gust, the adjustable settings cater to different preferences and scenarios. This makes it an ideal solution for personal spaces, such as bedrooms or offices.

The oscillation function of the Lasko 2108 enhances its cooling capabilities by distributing air evenly across the room. This feature ensures that no corner goes untouched, making it a great choice for larger areas. The oscillating head can pivot up to 90 degrees, allowing for wide-angle air circulation, ultimately increasing comfort.

Constructed with portability in mind, the Lasko 2108 features a lightweight design complemented by a built-in carry handle. This facilitates easy movement from one room to another, making it an excellent option for individuals who need efficient air circulation in various locations throughout their homes. The fan is also compact, ensuring it can easily fit into tight spaces without sacrificing performance.

In terms of energy efficiency, the Lasko 2108 is designed to help reduce electricity costs compared to central air conditioning units. By providing a cooling effect with lower energy consumption, it serves as an economical option during hot weather. The fan operates quietly, minimizing noise disruption whether you’re working, sleeping, or engaging in leisure activities.

Another standout characteristic of the Lasko 2108 is its ease of assembly and maintenance. The fan typically requires minimal setup right out of the box, allowing users to enjoy relief from the heat almost immediately. Additionally, cleaning the fan is straightforward, with removable grills that facilitate dusting and upkeep.

Overall, the Lasko 2108 combines efficiency, convenience, and user-focused features, making it an excellent addition to any home. Whether for cooling a single room or providing airflow throughout a larger space, it offers a practical solution for battling heat and ensuring comfort all summer long.