Shark V1911TR manual Cleaning the Dust Cup Container, To Maximize The Life Of Your Ni-cd Batteries

Page 7

OPERATING INSTRUCTIONS

Cleaning the Dust Cup Container

To achieve the best performance, empty the dust cup container after each use.

1.Press the dust cup release lever with your foot. (Fig. 9) Note: Be careful not to accidentally turn the unit “On”

Fig. 9

2.Lift out the dust cup container, which is connected to the handle. Hold over a trash bin and push down on the dust cup empty button located on the handle. (Fig. 10)

Dust Cup

Empty Button

Fig. 10

3.To close the dust cup container press firmly on the bottom panel until it snaps back into place. To replace the dust cup container, position onto the sweeper power head and press down firmly until it snaps back into place.

8

OPERATING INSTRUCTIONS

To Maximize The Life Of Your Ni-cd Batteries

1.Charge for a minimum of 20 hours before initial use. Failure to do so will reduce the product’s battery life significantly.

2.Do not store the unit with the charging adaptor attached and plugged in.

3.Only recharge when the batteries are fully discharged (or as close to fully discharged as possible).

4.Do not store in areas of high temperature or humidity.

5.After three (3) months of storage, the product should be fully discharged and then recharged to maximize battery power.

6.Use only the charger supplied with the product. If other chargers are used, the batteries can fail causing damage to the battery, product or personal property.

7.Ni-Cd batteries have a long useful life but at some time they will need to be replaced. To purchase replacement batteries and parts, visit our website www.sharkvac.com.

Note: If the product has never been used or has been stored for an extended period of time without use – it will take several complete charge and discharge cycles to realize the full operational time of your product.

Battery Removal & Disposal

Note: If uncertain as to how to remove your battery pack, we suggest you take your sweeper to a reputable small appliance service technician to have this service performed.

Follow the steps in “Removal of Battery Pack” when battery removal is required.

This sweeper is equipped with Ni-Cd batteries and you need to dispose of them properly. When the batteries are no longer good for use, they must be removed from the sweeper for disposal. Do not remove the batteries for any reason other than disposal of them.

Call your nearest recycling center for information on the recycling and disposal of Ni-Cd batteries.

Warning: You must never use ordinary batteries for replacement as these may leak and cause damage. Use only battery pack XB1911 provided for replacement.

5

Image 7
Contents Models V1911, V1911TR Volt DC Speed Cordless SweeperPage V1911 V1911TR Read ALL Instructions Before Using Your Cordless SweeperParts and Components TroubleshootingOperating Instructions Care And MaintenanceAssembling Your Cordless Sweeper Changing The Rotating Brush, Gear Box & Squeegee Charging InstructionsBattery Removal & Disposal Cleaning the Dust Cup ContainerTo Maximize The Life Of Your Ni-cd Batteries How To Operate Your Cordless Sweeper Removal of Battery PackAnti-Jam Brush Roll Feature

V1911TR, V1911 specifications

The Shark V1911 and V1911TR are impressive additions to the world of high-performance remote-controlled vehicles. Designed for enthusiasts who demand both speed and precision, these models incorporate advanced technologies and features that set them apart from the competition.

One of the main characteristics of the V1911 is its robust design. Built with durable materials, the structure is engineered to withstand the rigors of off-road exploration while remaining lightweight for agile performance. The aerodynamic shape minimizes air resistance, thereby enhancing speed and stability, even on uneven terrains.

A standout feature of both models is the powerful brushless motor. This technology provides high efficiency and longer runtimes compared to traditional brushed motors. The V1911 is capable of reaching impressive speeds, making it suitable for racing enthusiasts, while maintaining a controllable experience for novice users. The V1911TR variant takes performance a step further, offering enhanced torque and acceleration, ideal for thrilling stunts and jumps.

Equipped with a sophisticated four-wheel-drive system, both the V1911 and V1911TR deliver superior traction and control. This feature ensures that the vehicles can conquer obstacles, whether on dirt tracks or rocky paths. The adjustable suspension system, with high-performance shock absorbers, allows users to fine-tune the ride height and damping to match their driving style and environment.

Additionally, the V1911 and V1911TR come with an advanced remote control system that offers a wide range and precision steering. Users can enjoy real-time feedback and adjustments, thanks to the intuitive layout of controls. The vehicles also include multiple speed settings, making them accessible for drivers of all skill levels.

Battery life is another important aspect; both models feature high-capacity lithium-polymer batteries, providing extended run times. Quick-charge capabilities mean less downtime between sessions, allowing for more time spent enjoying the thrilling experience they offer.

In summary, the Shark V1911 and V1911TR are equipped with cutting-edge features and technologies that cater to both novice and seasoned RC enthusiasts. With their powerful motors, durable design, advanced control systems, and remarkable agility, these models promise an exhilarating experience on any terrain, making them a worthy addition to any RC collection.