Charging Instructions

OPERATING INSTRUCTIONS

1.Connect the charger plug to the charging jack or hole on the side of the sweeper. Plug the charging adapter into the wall outlet. (120V., 60Hz.) Use only charger KA12D075015023U. (Fig. 2)

Charging

Light

Indicator

Fig. 2

2.This cordless sweeper is powered by Ni-Cd batteries. Before first use, they must be charged for a minimum 20 hours.

3.When recharging the unit, the "On/Off" switch must be in the "OFF" position.

4.The charging light indicator on the top of the sweeper will illuminate to indicate that the sweeper is properly charging.

5.To recharge, repeat step #1 above. Charging times will vary depending upon the amount of usage between charging cycles.

Note: If, when you place the sweeper to recharge and the charging indicator light does NOT illuminate, then press the On/Off button once to turn the sweeper off. The charging indicator light should now light up.

Note: Peak performance may only be realized after the unit has been charged and discharged two (2) or three (3) times.

Important: To maintain peak performance of your cordless sweeper, it is recommended that the unit be fully discharged, then completely re-charged at least once a month.

Caution:

•Use only the adaptor supplied with the sweeper.

•Do not clean the sweeper while unit is charging.

•Do not attempt to remove the battery pack from the unit to charge it.

•Never attempt to throw the battery pack or unit into a fire or incinerate it.

•Do not attempt to remove or damage the battery casing.

OPERATING INSTRUCTIONS

Changing The Rotating Brush, Gear Box & Squeegee

1.Remove the extension tube handle from the sweeper power head.

2.Turn the sweeper power head upside down being careful not to accidentally turn the unit “On”.

3.Remove the brush cover.

4.Push in on the locking tab of the gear box and lift the gear box to remove. (Fig. 12 & Fig 13)

Lift

Gear box	Locking
	tab

Gear box
		Fig. 13
tabs	Fig. 12

5.Lift the brush bar end cap up from the slot. (Fig. 14)

Fig. 14

6.Pull the brush bar out from the bushing and slip off the belt to remove the brush bar. (Fig. 15)

7.Insert the new brush bar by first inserting the brush bar into the bushing on the end opposite the driver belt (Fig. 15)

Fig. 15

V1917 specifications

The Shark V1917 is a premium vacuum cleaner that has gained recognition for its advanced features and exceptional performance. As part of the Shark lineup, this model is designed to cater to the needs of modern households, providing powerful cleaning capabilities with user-friendly functionalities.

One of the standout features of the Shark V1917 is its impressive suction power. Equipped with a high-efficiency motor, it ensures effective dirt removal from carpets and hard floors alike. The vacuum is designed with a dual-brush roll system, which combines a soft brush roll for capturing large debris and a stiff brush roll for deep cleaning embedded dirt, offering a comprehensive solution for various floor types.

The model also incorporates advanced technology in its filtration system. The Shark V1917 is equipped with a HEPA filter, which is crucial for trapping allergens and dust particles, making it an excellent choice for allergy sufferers. This feature ensures that the air released back into the home is cleaner and healthier.

In addition to its powerful suction and filtration, the Shark V1917 showcases a lightweight and ergonomic design. Weighing significantly less than competing models, it allows for easy maneuverability around furniture and up and down stairs without the fatigue typically associated with heavier vacuums. The vacuum also features a swivel steering mechanism, enhancing its ability to navigate tight spaces with ease.

A notable characteristic of the Shark V1917 is its versatility. It comes with various attachments, including a crevice tool and a pet tool, which allows users to clean upholstery, stairs, and tight corners effectively. The vacuum’s detachable canister enables seamless transitions from floor cleaning to above-floor surfaces, further expanding its usability.

The Shark V1917 also emphasizes convenience with its easy-to-empty dust cup, which minimizes the mess often associated with traditional bagged vacuums. Furthermore, the power cord offers an extended reach, reducing the frequency of outlet changes during cleaning sessions.

In summary, the Shark V1917 stands out in the competitive vacuum cleaner market due to its powerful performance, advanced filtration technology, lightweight design, and versatile attachments. These features make it a reliable choice for households seeking an efficient cleaning solution tailored to their needs. With its combination of technology and practicality, the Shark V1917 is designed to deliver exceptional cleaning results while enhancing the user experience.