Shark EP730 Using Your Cordless Vacuum, Changing & Cleaning the Dust CUP Filter, Battery Disposal

Page 3

USING YOUR CORDLESS VACUUM

1.Remove the vacuum cleaner from the charging base (#14).

2.To start the unit, press the On/Off Switch to the On position.

3.To stop the vauum cleaner, press the On/Off Switch to the Off position.

4.The vacuum cleaner is equipped with a 180° Swivel Handle (#10) for convenient operation.

5.A crevice tool (#7) is provided for cleaning narrow, hard to reach places. This tool is conveniently stored inside the swivel handle.

IMPORTANT

When the vacuum cleaner is operating, the LED lights up which means that the battery is low and the unit should be recharged.

CHANGING & CLEANING THE DUST CUP FILTER

To achieve the best performance, empty the dust cup container (# 2 ) and clean the dust cup filter (# 3 ) after each use.

1.To open the dust cup compartment (#2), press down on the dust cup release button (#8) and pull out the dust cup compartment (#2).

2.Pull out the dust cup filter (#3).

3.Empty the dust from the dust cup compartment (#2).

4.Rinse the dust cup filter (#3) in cold water, and then wait until it dries completely before replacing it into the dust cup compartment (#2).

5.Replace the dust cup filter (#3) carefully into the dust cup compartment (#2). NEVER operate vacuum cleaner without dust cup filter (#3) in place.

6.Attach the dust cup compartment (#2) to the cordless vacuum.

NOTE: It is recommended that the dust cup filter be changed every three (3) months to ensure peak performance of the unit.

CAUTION: The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.

3

BATTERY PACK REPLACEMENT

NOTE: If uncertain as to how to change your battery pack, we suggest you take your vacuum to a reputable small appliance service technician to have this service performed.

This vacuum cleaner is equipped with Ni-Cd batteries and you need to dispose of them properly. When the batteries are no longer good for use, they must be removed from the vacuum cleaner for disposal. Do not remove the batteries for any reason other than disposal of them.

The battery pack of your EP730 is replaceable, however care should be taken when doing so. Follow these steps when replacement is required:

1.Open the battery compartment (#6), by removing the single, Phillips head screw located at the rear of the unit. NEVER open battery compartment (#6) except to change the battery when required.

2.Remove battery compartment cover. Set aside battery compartment cover and screw.

3.Lift out old battery pack and set aside.

4.Carefully detach the two (2) electrical connectors from the battery pack by pulling straight away from the battery.

5.Re-connect terminals by pushing lead wires onto battery tabs and insert new battery pack in battery compartment and.

6.Tuck wiring inside battery compartment so that the wiring does not interfere with the battery compartment cover when it is replaced.

7.Re-install the battery compartment cover ensuring that the locating tabs engage the body of the unit.

8.Replace the battery compartment cover screw.

CAUTION

Use only with the battery pack supplied with the unit.

Do not attempt to remove the battery pack from the unit to charge it.

Never attempt to throw the battery pack or unit into a fire or incinerate it.

Do not attempt to remove or damage the battery casing.

Battery must be recycled or disposed of properly at the end of it's service life.

WARNING:NEVER use ordinary batteries for replacement, as these may leak and damage your vacuum cleaner.

CAUTION: NEVER use the unit without the battery compartment cover in place.

BATTERY DISPOSAL

This vacuum cleaner contains a nickel-cadmium (Ni-Cd) batteries and must be disposed of properly. Call your nearest recycling center for information on the recycling and disposal of nickel-cadmium (Ni-Cd) batteries

4

Image 3
Contents For Household USE only USE and Care InstructionsCharging Your Cordless Vacuum AssemblyShark Cordless Hand Vac Before USEBattery Disposal Using Your Cordless VacuumChanging & Cleaning the Dust CUP Filter Battery Pack ReplacementFor Model EP730 Problem Possible Reason Possible SolutionOwnership Registration Card ONE 1 Year Limited Warranty

EP730 specifications

The Shark EP730 is an innovative product designed to redefine user experience in the realm of personal care. This remarkable device stands out due to its state-of-the-art features, advanced technologies, and unique characteristics, making it a top choice for consumers seeking effective and convenient solutions.

One of the standout features of the Shark EP730 is its powerful suction technology. Equipped with a high-performance motor, it provides strong suction capabilities that efficiently capture dirt, debris, and hair from various surfaces, ensuring a thorough clean. The device is engineered to tackle both large particles and fine dust, making it versatile for use on carpets, hardwood floors, and upholstery.

Another significant characteristic of the Shark EP730 is its user-friendly design. The lightweight and ergonomic structure allows for easy maneuverability, enabling users to navigate around furniture and reach those hard-to-access areas without hassle. Additionally, the design includes a comfortable grip that minimizes hand strain during extended use, enhancing overall user comfort.

The Shark EP730 also incorporates advanced filtration systems designed to improve air quality. With a HEPA filter at its core, this device captures allergens, dust mites, and pet dander, promoting a healthier home environment. The washable filter can be easily maintained, ensuring optimal performance over time.

Furthermore, the Shark EP730 features an innovative attachment system that enhances its versatility. With specialized tools for different cleaning tasks, such as a pet brush and crevice tool, users can customize their cleaning experience to suit specific needs. This adaptability makes the device suitable for households with pets, as well as for tackling intricate corners and crevices.

One of the most appealing aspects of the Shark EP730 is its advanced technology integration. Features like LED lights on the nozzle illuminate hidden debris, ensuring no dirt is left behind. Additionally, the cleaner includes smart sensors that adjust suction power based on the type of flooring, which not only optimizes cleaning efficiency but also conserves energy.

In conclusion, the Shark EP730 is a robust, versatile, and user-oriented cleaning device designed to meet the diverse needs of modern consumers. With its powerful suction, ergonomic design, advanced filtration, and thoughtful attachments, it proves to be an essential tool for maintaining a spotless home. As technology continues to evolve, the Shark EP730 exemplifies the commitment to quality and innovation in personal care products.